ichivictus
1 µW
- Joined
- Aug 30, 2015
- Messages
- 4
First off here's the specs:
Motor - 1x Turnigy 6354 260kv
ESC - TorqueBoards 12S 120A Car ESC OPTO HV w/ UBEC
Battery - Turnigy nano-tech 3850mah 10S 65~130C Lipo
All the pulleys, belt, etc. I got from diyelectricskateboard except I got the enertionboards trucks and enertionboards motor mount.
I finally got it all together, with no weight it worked fine. Once my body weight was on it, it was grinding trying to move. I weigh 145 lb. I got it to go a few times on very flat surfaces but the one time I tried starting on a very small hill/bump, it smoked the battery out. The system turned off and would not turn back on.
I tried connecting the battery to the charger to test it and it says the connection is broken (Turnigy Mega 400w).
When connecting it to the board again, which might have been a really dumb idea, there were spark sounds, the power analyzer would turn on for a few seconds then fade out.
Is the battery busted? :/ I was told this battery wasn't a good pick but I thought it would still be good enough to get something working.
Motor - 1x Turnigy 6354 260kv
ESC - TorqueBoards 12S 120A Car ESC OPTO HV w/ UBEC
Battery - Turnigy nano-tech 3850mah 10S 65~130C Lipo
All the pulleys, belt, etc. I got from diyelectricskateboard except I got the enertionboards trucks and enertionboards motor mount.
I finally got it all together, with no weight it worked fine. Once my body weight was on it, it was grinding trying to move. I weigh 145 lb. I got it to go a few times on very flat surfaces but the one time I tried starting on a very small hill/bump, it smoked the battery out. The system turned off and would not turn back on.
I tried connecting the battery to the charger to test it and it says the connection is broken (Turnigy Mega 400w).
When connecting it to the board again, which might have been a really dumb idea, there were spark sounds, the power analyzer would turn on for a few seconds then fade out.
Is the battery busted? :/ I was told this battery wasn't a good pick but I thought it would still be good enough to get something working.