Viewing post history: Re: PAS (Pedal Assist Sensor) installation problems.

This page shows all versions of the post, starting with the most current version.
Viewing post history
This page shows all versions of the post, starting with the most current version.

Current post: Re: PAS (Pedal Assist Sensor) installation problems.

Postby motomech » Fri May 20, 2016 10:11 pm

Mount the sensor externally. The bracket is malable, bend(hammer) and fold it into a curved shape that conforms to the bottom of bottom bracket shell and epoxy it there.
But before you glue it, mock it up and test.
The sensor needs to be close to the disc and it's likely you will have to turn the sensor itself around.
Sorry, no pics, mybike is too dirty underneath :roll:
Edited by motomech on Fri May 20, 2016 10:14 pm.
Motomech

'03 Rocky Mountain Edge 2WD 260 Q100H frt and Ezee V1 rear 2 Elifebike 20A & 25A 9-FET controllers 12S/20Ah Multistar Lipo rear 5Ah Turnigy frt Luna Cyclops Extra lite Alex 24DM rims, 2.4 Holly Rollers run ghetto tubeless. 25 mph. Mean Well HLG-320H-48A
viewtopic.php?f=3&t=83430
'07 GT Idive 4 4.0, Q100C 201 12S LiPoly elifebike 9-FET 17A controller. 20 MPH.
viewtopic.php?f=2&t=84624&p=1237928#p1237928
User avatar
motomech
100 MW
100 MW
 
Posts: 2700
Joined: Sat Sep 11, 2010 12:21 am
Location: Tucson Az.

Original post: Re: PAS (Pedal Assist Sensor) installation problems.

Postby motomech » Fri May 20, 2016 10:11 pm

Mount the sensor externally. The bracket is malable, bend(hammer) it into a curved shape that conforms to the bottom of bottom bracket shell and epoxy it there.
But before you glue it, mock it up and test.
The sensor needs to be close to the disc and it's likely you will have to turn the sensor itself around.
Sorry, no pics, mybike is too dirty underneath :roll:
Motomech

'03 Rocky Mountain Edge 2WD 260 Q100H frt and Ezee V1 rear 2 Elifebike 20A & 25A 9-FET controllers 12S/20Ah Multistar Lipo rear 5Ah Turnigy frt Luna Cyclops Extra lite Alex 24DM rims, 2.4 Holly Rollers run ghetto tubeless. 25 mph. Mean Well HLG-320H-48A
viewtopic.php?f=3&t=83430
'07 GT Idive 4 4.0, Q100C 201 12S LiPoly elifebike 9-FET 17A controller. 20 MPH.
viewtopic.php?f=2&t=84624&p=1237928#p1237928
User avatar
motomech
100 MW
100 MW
 
Posts: 2700
Joined: Sat Sep 11, 2010 12:21 am
Location: Tucson Az.

Return to E-Bike Technical

Who is online

Users browsing this forum: aschigrunder and 15 guests