QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

Hi Vito (and lurkers),

I have a Mini-E and a QS205.

The pinout of the QS hall connectors appears to be (looking at the pins of the motor side) ((+,T,-),(H1,H2,H3)).

There are two redundant sets of sensors and connectors, and one supplied female connector. It had some goop installed over the end that the wires come out, and I expected to find the female pins inside, ready to be terminated to my Adaptto cable, but there was nothing. Are we meant to get these pins with the motor, or are they a commodity item? (are they still hiding somewhere in the shipping box???)
 
jmz said:
Hi Vito (and lurkers),

I have a Mini-E and a QS205.

The pinout of the QS hall connectors appears to be (looking at the pins of the motor side) ((+,T,-),(H1,H2,H3)).

There are two redundant sets of sensors and connectors, and one supplied female connector. It had some goop installed over the end that the wires come out, and I expected to find the female pins inside, ready to be terminated to my Adaptto cable, but there was nothing. Are we meant to get these pins with the motor, or are they a commodity item? (are they still hiding somewhere in the shipping box???)
Click to expand...

Hello Jmz,

I don't understand cleary, could you please send email to me with some pictures (vito@tzquanshun.com)?

Best Regards1
 
jansevr said:
Thanks Vito and QS for a great motor. Anyone else questioning whether or not to get this motor - you shouldn't. If you want the best most powerful hub for a bike out there - look no further. This motor is an absolute beast. Full throttle time after time from a dead stop to 40mph+ pulling 14kw peaks and cursing around at 35-40mph for 5-10 miles is no problem for this motor. I've even ridden with a passenger (total weight with bike and passengers around 400lbs) for 10-15 miles at a time without any heat issues (and still riding fast and having fun 10+kw under acceleration and 2-2.5kw continuous at about 35mph).


Janserv, how was the wheelset packed? Did it arrive in good condition? How was the trueness of the rims?
Click to expand...
 
The wheelset was very well packaged in molded styrofoam no movement. Wheels were very true spokes all look good tight and well laced no weird angles. Rear with motor spokes loosened up a bit after hard riding and some racing for about 200 miles total. Rim still very true easy to tighten spokes and keep well balanced took me 5 minutes to tighten.
 
jansevr said:
The wheelset was very well packaged in molded styrofoam no movement. Wheels were very true spokes all look good tight and well laced no weird angles. Rear with motor spokes loosened up a bit after hard riding and some racing for about 200 miles total. Rim still very true easy to tighten spokes and keep well balanced took me 5 minutes to tighten.
Click to expand...

Thanks Janserv. Good to have independent confirmation of a high quality product. I have personally bought wheelsets in past that have arrived in very poor condition from other vendors. Once again, thanks for the review
 
Received my wheel set and motor today, impressed with fit and finish and packaging. Likewise I have received some very seedy looking packages, my cromotor appeared to have been dropped to its destination from orbit. QS packaging was great and no discernible damage.

Initial quick glance the true job looks reasonable, I will have a proper go at it with a run-out gauge at home and get it really dialed in but it's not bad at all. Looking forward to getting the tires mounted up and rolling on them, hopefully by tomorrow! Great job
 
Hi Vito,

I've decided I want to buy a 205 V3. Is it possible to connect one to a Crystalyte controller?
 
Merlin said:
pornhub :lol:

whats the "real" weight now?
Click to expand...

For 4000W 273 40H V3 E-Bike Motor, it's 18.1kg (N.W.).
http://www.cnqsmotor.com/en/article_read_260.html#

Best Regards
 
QSMOTOR said:
Merlin said:
pornhub :lol:

whats the "real" weight now?
Click to expand...

For 4000W 273 40H V3 E-Bike Motor, it's 18.1kg (N.W.).
http://www.cnqsmotor.com/en/article_read_260.html#

Best Regards
Click to expand...

I added have 3 motors from which I got the data easily in this thread in "my" overview Wiki page here. Hope it helps someone to compare.
@Vito: Feel free to PM me some details so I can add more of your product line to the list, maybe even get a few detailed pages up for the most popular ones. I'm happy to help anyone who has trouble entering the data, feel free to PM me.
 
marcexec said:
I added have 3 motors from which I got the data easily in this thread in "my" overview Wiki page here. Hope it helps someone to compare.
@Vito: Feel free to PM me some details so I can add more of your product line to the list, maybe even get a few detailed pages up for the most popular ones. I'm happy to help anyone who has trouble entering the data, feel free to PM me.
Click to expand...

Thank you so much, Marcexec, I will PM you when necessary.

Best Regards
 
Taizhou Quanshun Motor Co.,Ltd.(not QS MOTOR LIMITED) is a leading manufacturer of high power electric wheel hub motors in Zhejiang, China . The Registered Trademark is QSMOTOR and short for QS Motor" or QSMOTOR. Taizhou SIA trading Co.,Ltd is the subsidiary company of QSMOTOR, who devotes on electric motor & kits. In order to protect the intellectual property rights, prevent counterfeit and shoddy products, hereby, Taizhou Quanshun Motor Co.,Ltd. would like to state that Taizhou SIA Trading Co., Ltd. is our own and the only official Export Department.

Both sides authorize the following websites as our formal channel of distribution:
Official website: http://www.cnqsmotor.com/en/
Alibaba: http://qsmotor.en.alibaba.com/
Alibaba: http://tzquanshun.en.alibaba.com/
Aliexpress: http://www.aliexpress.com/store/1389549
Endless Forum: https://endless-sphere.com/forums/viewtopic.php?f=31&t=65972
Facebook: https://www.facebook.com/tzqsmotor/?ref=bookmarks
Statement of QSMOTOR & SIA-.jpg
QSMOTOR Logo.png
SIA Logo 750X216.png
 
QSMOTOR said:
Taizhou Quanshun Motor Co.,Ltd.(not QS MOTOR LIMITED) is a leading manufacturer of high power electric wheel hub motors in Zhejiang, China . The Registered Trademark is QSMOTOR and short for QS Motor" or QSMOTOR. Taizhou SIA trading Co.,Ltd is the subsidiary company of QSMOTOR, who devotes on electric motor & kits. In order to protect the intellectual property rights, prevent counterfeit and shoddy products, hereby, Taizhou Quanshun Motor Co.,Ltd. would like to state that Taizhou SIA Trading Co., Ltd. is our own and the only official Export Department.

Both sides authorize the following websites as our formal channel of distribution:
Official website: http://www.cnqsmotor.com/en/
Alibaba: http://qsmotor.en.alibaba.com/
Alibaba: http://tzquanshun.en.alibaba.com/
Aliexpress: http://www.aliexpress.com/store/1389549
Endless Forum: https://endless-sphere.com/forums/viewtopic.php?f=31&t=65972
Facebook: https://www.facebook.com/tzqsmotor/?ref=bookmarks
Click to expand...

So, to clarify, http://www.hs-escooter.com/ is just a dealer reselling your products, right?
Edit: Ah I see, they just registered http://www.qs-motor.com/ :roll:
 
marcexec said:
QSMOTOR said:
Taizhou Quanshun Motor Co.,Ltd.(not QS MOTOR LIMITED) is a leading manufacturer of high power electric wheel hub motors in Zhejiang, China . The Registered Trademark is QSMOTOR and short for QS Motor" or QSMOTOR. Taizhou SIA trading Co.,Ltd is the subsidiary company of QSMOTOR, who devotes on electric motor & kits. In order to protect the intellectual property rights, prevent counterfeit and shoddy products, hereby, Taizhou Quanshun Motor Co.,Ltd. would like to state that Taizhou SIA Trading Co., Ltd. is our own and the only official Export Department.

Both sides authorize the following websites as our formal channel of distribution:
Official website: http://www.cnqsmotor.com/en/
Alibaba: http://qsmotor.en.alibaba.com/
Alibaba: http://tzquanshun.en.alibaba.com/
Aliexpress: http://www.aliexpress.com/store/1389549
Endless Forum: https://endless-sphere.com/forums/viewtopic.php?f=31&t=65972
Facebook: https://www.facebook.com/tzqsmotor/?ref=bookmarks
Click to expand...

So, to clarify, http://www.hs-escooter.com/ is just a dealer reselling your products, right?
Edit: Ah I see, they just registered http://www.qs-motor.com/ :roll:
Click to expand...

Yup, http://www.hs-escooter.com/is just a dealer reselling our products.
please also note below web are not our official web (they register earlier).
http://www.qsmotor.com/
http://www.hs-escooter.com/
http://www.qs-motor.com/
http://www.qsmotor.cn/eabout.asp

Btw., we're optimizing our official web, adding more product and information.
http://www.cnqsmotor.com/en/
Thank you for your support!

Best Regards
 
:D
PKGB said:
Hi Vito,

I've decided I want to buy a 205 V3. Is it possible to connect one to a Crystalyte controller?
Click to expand...

205 V3 + Sabvoton ordered. Cant wait!!!
 
PKGB said:
:D
PKGB said:
Hi Vito,

I've decided I want to buy a 205 V3. Is it possible to connect one to a Crystalyte controller?
Click to expand...

205 V3 + Sabvoton ordered. Cant wait!!!
Click to expand...

Thank you for your support.
Could you please advise where you place the order?

Best Regards
 
You must log in or register to reply here.

Similar threads

Montage.pl
QS 273 motor 2 different versions ...
Replies
8
Views
1,194
Santacruz
Santacruz
G
8.75kV = what T count? QS Motor
Replies
3
Views
689
gobi
G
J
New motor: QS 138 90H V3 4kw mid drive motor with 1:2.35 gear box
Replies
7
Views
1,048
j bjork
J
L
Sevcon Gen4 troubles
Replies
7
Views
1,572
djgabriel2004
D
H
QS Motor 205 50H V3ti
Replies
15
Views
1,963
chuyskywalker
chuyskywalker
Back
Top