WOHOOOOO, thats all I can say. Crazy, crazy torque for sure. It pulled my up my hill at home which is about a 20 incline at 15mph! Nice. I did order some aluminum for a new motor mount. My first mount was made of 2 2x4s cut to the dimensions I needed. Thats a 3 inch piece of wood! That snapped in 3 seconds flat, crazy torque. My 2nd attempt my neighbor suggested ply wood since its layers are laminated and crossed it wont break with the grain of the wood. Great idea. I have a couple of ½ sheets left over in my basement. So this time I table sawed and mitered 4 pieces of ply to give me my 3 inches needed. Works great so far. No signs of stressing or cracking. Been riding up and down in my wet back yard in thick grass without any problem. Rides more like a dirt bike now. It only has 8 inch street tires on it, man if the frame would allow 12 inch tires and a suspension, Id be unstoppable. This was fun. Only downside is the top speed is only about 15 mph. Want to gear up to get a little more top end, but not to much since it'll make me lose my torque. What gear ratios are you guys using in yours? Drewjet, you are right, I do want MORE, thanks.