QSMOTOR,0.5-12kW Electric Hub Motor & Mid Drive Motor Manufacture China

Place for dealers to post items for sale.
User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-16kW Electric In-Wheel Hub Motors Manufactu

Post by QSMOTOR » Sep 17 2016 3:52am

DasDouble wrote:Some bad new: :(
My motor is squeaking again. Now after leaving my bike two weeks in my house without moving the wheel I have to "refill" the motor with this stuff I was talking about in my previous post, which name I have forgotten. Well.. Now I have to refill this motor every single day. Otherwise I would have to hear all time this high sounding squeaking.. :O :(
Anyone know how to solve this problem 100%? 
I remember last time, our engineer told me change the oil seal could help.

Best Regards
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Sep 17 2016 4:02am

litespeed wrote:Just have to say how much fun the QS 205 3.5T/ MaxE controller set up is. Completely quiet, all I hear is my Shinko 241's and wind.

I'm waiting till I get some ferrofluid and Sketch's heat sinks to really turn up the power but just under 11 KW is just freaking awesome.

The motor has not even hit 180 degrees yet (peaked at 175) and that was riding pretty aggressively up to about 50 mph.

Super cool is all I can say!

Tom
Thank you for sharing, Tom.
Please take care of the motor temp.
QS Motor could work 120 ℃ in half an hour without damage.
Suggestion (Setting of Controller)
When it's 130 ℃ inside of motor (in 30s), the current should be limited 50%.
When it's 150 ℃, the controller shut down. When it drop down to 110℃, the controller work again.

Btw., could you please advise the setting of the controller?

Best Regards
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

litespeed   100 kW

100 kW
Posts: 1433
Joined: Aug 11 2010 4:42pm
Location: O’Fallon, Missouri

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by litespeed » Sep 17 2016 7:42am

QS,

I'm not even close to those temps, I'm in the USA and these are Fahrenheit not Celsius! I have my MaxE kicking the amps back at 250 degrees Fahrenheit which is close to the 120 you suggest.

I'm hoping that with the Hubsink and ferrofluid I'll never, ever get close to those temps.

Great motor though!

Tom
I'm married so you know I'm no stranger to pain!

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Sep 17 2016 9:34am

litespeed wrote:QS,

I'm not even close to those temps, I'm in the USA and these are Fahrenheit not Celsius! I have my MaxE kicking the amps back at 250 degrees Fahrenheit which is close to the 120 you suggest.

I'm hoping that with the Hubsink and ferrofluid I'll never, ever get close to those temps.

Great motor though!

Tom
Thank u for yr kindly information and well noted. :)
Then it will be ok, have fun!

Best Wishes
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
MadRhino   100 GW

100 GW
Posts: 7058
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by MadRhino » Sep 17 2016 6:17pm

I received a 205 H50 V3 30*4 T this week

Good communication, good packaging. Happy with this purchase. Now let's see how it will run.

I laced it today in a 24 X 65mm bicycle rim with 14 Ga DT Swiss spokes and rim washers, to replace the fried Cromotor V2 on my street bike.

Should be a tad faster, and sure able to take higher Amps. The motor is wider, it's gonna need some work on my torque plates and spacing the brake bracket. Maybe riding tomorrow, I will report.
Make it fool-proof, and I will make a better fool.
Current bikes
Street:
Trek Session 10 mod. Variable geometry. 70mph
Dirt:
Santa Cruz V10. 50mph

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Sep 17 2016 7:11pm

MadRhino wrote:I received a 205 H50 V3 30*4 T this week

Good communication, good packaging. Happy with this purchase. Now let's see how it will run.

I laced it today in a 24 X 65mm bicycle rim with 14 Ga DT Swiss spokes and rim washers, to replace the fried Cromotor V2 on my street bike.

Should be a tad faster, and sure able to take higher Amps. The motor is wider, it's gonna need some work on my torque plates and spacing the brake bracket. Maybe riding tomorrow, I will report.
Thank you for your support.
Btw., may I know the PI number of the 205 50H V3 30*4T Motor?

Best Regards
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
MadRhino   100 GW

100 GW
Posts: 7058
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by MadRhino » Sep 19 2016 7:10am

QSMOTOR wrote: Btw., may I know the PI number of the 205 50H V3 30*4T Motor?
?
Sorry Vito, I don't understand your question. Please precise.


Update:

Instead of doing a mod on my torque plates and brake mount, I did the mod on the motor for that was an easier work. 2 simple steps, needing a hacksaw and file. On the freewheel side, cutting 0.25" off the freewheel threaded mount, to fit the freewheel as close as it can be from the cover. On the disc side, cutting the extension of the axle shoulder that was meant to fit the small torque plate included. This is making the 205 fitting the exact dimensions of my Cromotor V2, Once installed the error was less than 1mm off my brake mount that was easily adjusted since my caliper is a post mount. The wheel is on and ready to ride, and I should find the time to replace the connectors tonight.
Make it fool-proof, and I will make a better fool.
Current bikes
Street:
Trek Session 10 mod. Variable geometry. 70mph
Dirt:
Santa Cruz V10. 50mph

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Sep 19 2016 7:16am

MadRhino wrote:
QSMOTOR wrote: Btw., may I know the PI number of the 205 50H V3 30*4T Motor?
?
Sorry Vito, I don't understand your question. Please precise.


Update:

Instead of doing a mod on my torque plates and brake mount, I did the mod on the motor for that was an easier work. 2 simple steps, needing a hacksaw and file. On the freewheel side, cutting 0.25" off the freewheel threaded mount, to fit the freewheel as close as it can be from the cover. On the disc side, cutting the extension of the axle shoulder that was meant to fit the small torque plate included. This is making the 205 fitting the exact dimensions of my Cromotor V2, Once installed the error was less than 1mm off my brake mount that was easily adjusted since my caliper is a post mount. The wheel is on and ready to ride, and I should find the time to replace the connectors tonight.
No problem, forget it.
And thank you for your updates! : )

Best Wishes
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
MadRhino   100 GW

100 GW
Posts: 7058
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by MadRhino » Sep 20 2016 7:42am

Motor spinning violently smooth and silent, with my bad ass upgraded 18 X 4110 square wave controller. Performance tests tonight, and complete bike checkup if I have the time. Probably leaving my huge dirt bike off the street tomorrow, and start using the street bike again to commute. 8)
Make it fool-proof, and I will make a better fool.
Current bikes
Street:
Trek Session 10 mod. Variable geometry. 70mph
Dirt:
Santa Cruz V10. 50mph

User avatar
MadRhino   100 GW

100 GW
Posts: 7058
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by MadRhino » Sep 20 2016 6:38pm

Big black hands and big white smile. :D

Bike tuned, controller/motor tuned. Started beating it already. Better acceleration than I had with the Cromotor V2. Higher Kv pulling harder on my controller that is getting warm quicker. Yet I believe it is within its reliability range. Absolutely no cogging nor harmonic noise, a nice buzz that is making me confident that it's not gonna develop much noise with age. Haven't checked the top speed yet, but looking like it's gonna beat the 73 Mph that I was doing with the Cromotor. Feels good to trade the dirt bike for a smoother ride.
Make it fool-proof, and I will make a better fool.
Current bikes
Street:
Trek Session 10 mod. Variable geometry. 70mph
Dirt:
Santa Cruz V10. 50mph

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by QSMOTOR » Sep 23 2016 7:01pm

MadRhino wrote:Big black hands and big white smile. :D

Bike tuned, controller/motor tuned. Started beating it already. Better acceleration than I had with the Cromotor V2. Higher Kv pulling harder on my controller that is getting warm quicker. Yet I believe it is within its reliability range. Absolutely no cogging nor harmonic noise, a nice buzz that is making me confident that it's not gonna develop much noise with age. Haven't checked the top speed yet, but looking like it's gonna beat the 73 Mph that I was doing with the Cromotor. Feels good to trade the dirt bike for a smoother ride.
Thank you for your kindly updates! : )

Best Wishes
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Sep 26 2016 10:08am

Can some one with a 273 -- 40h model measure the '' arrowed in pic'' shaft diameter just to confirm , it looks like 16mm, but a confirmed measurement would help me design my droupouts.
Attachments
273.jpg
273.jpg (81.54 KiB) Viewed 4681 times

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Sep 27 2016 7:58am

Well i found out the dimension arrowed is 16 mm so this concern's me before ordering, ist a bad design for the 273 Axel the 205 has a wider shoulder to clamp onto. but this is a 273 at 5.4kg heavier and most importantly has a over 100 nm :shock: more torque.
A redesign of the axle is needed

User avatar
macribs   1.21 GW

1.21 GW
Posts: 3676
Joined: Jul 22 2014 5:59pm

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by macribs » Sep 27 2016 9:01am

If you make up your own axle look for the thread on an axle design for a cromotor. They come up with a pretty nice design and a much stronger one then the cromotor had. Maybe you can get some ideas from that thread.

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Sep 27 2016 9:12am

The point here is qs have made a motor with over 100nm more with a weaker axle .. a responsible manufacturer would address it.

User avatar
MadRhino   100 GW

100 GW
Posts: 7058
Joined: Sep 03 2010 5:28pm
Location: Montreal QC Canada

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by MadRhino » Sep 27 2016 3:42pm

I did not check the drawings, but from memory... I recall the 273 had a 18mm axle when I planned the torque plates for my Fat Boy. Or did QS change the motor design ?
Make it fool-proof, and I will make a better fool.
Current bikes
Street:
Trek Session 10 mod. Variable geometry. 70mph
Dirt:
Santa Cruz V10. 50mph

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Sep 28 2016 8:20am

MadRhino many models of 273.. is yours a 273 --45h, if so qs state its 14.. but the 205 x 50 is 10 x16mm the model im talking about is spoked 273 x40 with 12 x16 axel. hope vito will push for a redesign.

User avatar
Quokka   1 kW

1 kW
Posts: 305
Joined: Feb 09 2016 7:44am
Location: Perth, Western Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Quokka » Sep 29 2016 12:42am

I asked about this a while ago. From memory they did not want to remove any more material from the axle (going from 12 to 10 mm flats) for fear of snapping the axles). If they were to redesign it, they should also make the freewheel a british thread instead of metric
Qulbix Q76R+ QS205+MaxE

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Sep 29 2016 8:37am

Hey quokka Imo this motor deserves a custom clamping droupout so the 12mm between the flat im ok with , they could even go to 18 if they wanted .
Green arrowed in digram is what they have done in 205 x 50 v3 a simple shoulder not hard to do ...way better ,They could use the whole axel diametre before the step to the threaded section and instead of 4mm depth in diagram go to a min of 10mm depth. = 2 wins big increase in clamping surface area and axel strenth where most axels break.... do this on both sides if possible for the win.
Attachments
axel.PNG
axel.PNG (212.21 KiB) Viewed 4539 times

User avatar
Quokka   1 kW

1 kW
Posts: 305
Joined: Feb 09 2016 7:44am
Location: Perth, Western Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Quokka » Oct 01 2016 3:58am

Must admit, i am thinking of seeing if someone locally could modify the axle to get it down to 10mm. If they made it 10mm flats from the factory they would sell loads of these
Qulbix Q76R+ QS205+MaxE

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Oct 01 2016 8:34am

Already One 273 has been reported in my build thread has a broken axel, As you said qs wouldnt weaken the axel further from 12mm for you, for obvious reasons, and atm its one of the worst nm to axel strenth ratios,
thats why im pushing for a redesign, better to get a strong axel from a manufacturer then its easier / cheaper to mod a droupout. Im Talking to them atm on this.

User avatar
liveforphysics   100 GW

100 GW
Posts: 14137
Joined: Oct 29 2008 1:48am
Location: Santa Cruz, CA, USA

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by liveforphysics » Oct 01 2016 6:03pm

Big axle is a blessing if you are into making torque.
Each carcinogen vapor exposure includes a dice roll for cancer.

Each mutagen vapor exposure includes a dice roll for reproductive genetic defects in your children.

Each engine start sprays them into a shared atmosphere which includes beings not offered an opportunity to consent accepting these cancer experiences and defective genetics life experiences.

Every post is a free gift to the collective of minds composing the living bleeding edge of LEV development on our spaceship.

User avatar
Emoto   10 kW

10 kW
Posts: 544
Joined: Jun 13 2011 9:31am
Location: Australia

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Emoto » Oct 02 2016 10:25am

liveforphysics wrote:Big axle is a blessing if you are into making torque.
Ow yeah :mrgreen: Torque :mrgreen: ..What would our e journey be without that..

User avatar
QSMOTOR   1 kW

1 kW
Posts: 351
Joined: Sep 17 2013 3:14am
Location: QS Motor,Jinqing Town, Luqiao District, Taizhou City, Zhejiang Province
Contact:

Bluetooth intelligent anti-theft device by VOTOL

Post by QSMOTOR » Oct 14 2016 8:01pm

VOTOL is developing intelligent anti-theft device.
It include One button engine satrt, handle lock, Cushion Lock for normal function (suit for other controller).
For Extra with APP on IOS, it could connect with VOTOL controller for more functions.
Remote Control, Speedometer, GPS, Vechile Condition, etc.

For details, refer to below introduction. Here is some picture of APP (in chinese only so far).
1.jpeg
1.jpeg (50.56 KiB) Viewed 5639 times
2.jpeg
2.jpeg (56.96 KiB) Viewed 5639 times
3.jpeg
3.jpeg (31.18 KiB) Viewed 5639 times
4.jpeg
4.jpeg (48.01 KiB) Viewed 5639 times
5.jpeg
5.jpeg (53.36 KiB) Viewed 5639 times
Video
https://endless-sphere.com/forums/viewt ... 1#p1231911
Picture
Image
Image
Image

Best Regards
SiAECOSYS & QSMOTOR-Vito Ho
EV your life! 

-QSMOTOR/Taizhou Quanshun Electric Drive Technology Co., Ltd. -SiAECOSYS (Export Dept.)
-International Sales Manager -Tel: +86 0576 88551619 -Skype: vito-ho -QQ: 289026969
-WhatsApp/WeChat: +86 13656892883 -Email: vito@tzquanshun.com
-Facebook: https://www.facebook.com/cnqsmotor/
-Aliexpress: https://siaecosys.aliexpress.com/store/5881618

User avatar
Merlin   10 MW

10 MW
Posts: 2083
Joined: Jan 29 2013 10:00am
Location: europe

Re: QS MOTOR,0.5-14kW Electric Hub Motor Manufacture China

Post by Merlin » Oct 15 2016 4:16pm

thank you..."funny pics" would be helpfull if you want to sell to the rest of the world when this is minimum in english.

can you translate what we can see there? AND are the app in multilanguage?

Post Reply