smeagol222
100 W
10" 4000w v3 QS motor (I've been told by QS its more like 7kw peak).
http://www.qs-motor.com/product/10inch-4000w-v3-type-e-scooter-hub-motor/
Paired with 4KW-4.5KW Kelly Programmable Motor Controller(KEB72601) Peak Phase 280A Continuous Phase 110A (which I'm told at 'normal' values its 55-60a continuous, and 90amp peak)
http://www.qs-motor.com/product/4kw-4-5kw-kelly-programmable-motor-controllerkeb72601/
Ordered 72v 20ah portable lifepo4 (65a continuous, and 85amp peak discharge). Going to make a secondary 18650 which I'll explain further down
Wheel 7000w peak, but 72v x 90a is 6480w.
For kelly programming QS told me to put motor current at 100%, and battery current limit to about 70%.
so 70% of 120 is 84a. 72v at 84a = 6048watts. QS say that it can do 7000w peak
to get this exact number it would mean 97.22amps at 72v. This would mean setting the battery current limit to 81.01%. I dont want to damage the wheel or controller, but I still want max performance. I suppose I should just go with what QS is recommending?
The ebike being used
using 6awg wires and Zeva smart precharger
https://goo.gl/jPs5gp
main contactor SW80 NO (normally open) style Coil Voltage 72V 100A DC Contactor ZJW100A
https://goo.gl/lBlx1t
The controller
The battery
View attachment 18
View attachment 17
The QS wheel
High power DC converter 35a
https://goo.gl/AYGrUl
For use with air horns
Low power DC converter 10A (lights, precharger etc)
https://goo.gl/9lnMVj
Wolo Air horns
Model 419 12v 123.5 Decibels 530 / 680 Hz
https://goo.gl/0qrpvd
Model 619 12v 123.5 Decibels 320 Hz
https://goo.gl/yzLrZs
LED headlight bar
12" inch 72W Flood Spot Combo Current draw:6A@12 ?
http://a.co/5tlanAz
Trunk with LED (46 Ltr)
https://goo.gl/uKFm0l
Watt meter/Ammeter with 100a shunt - only $20 cad, didn't really need the whole Cycle Analyst for $160+ etc
https://goo.gl/rHU4X2
View attachment 3
View attachment 2
Some initial wiring - will be connecting the (+) out of ammeter to PWR so it gets turned off with ignition
http://www.qs-motor.com/product/10inch-4000w-v3-type-e-scooter-hub-motor/
Paired with 4KW-4.5KW Kelly Programmable Motor Controller(KEB72601) Peak Phase 280A Continuous Phase 110A (which I'm told at 'normal' values its 55-60a continuous, and 90amp peak)
http://www.qs-motor.com/product/4kw-4-5kw-kelly-programmable-motor-controllerkeb72601/
Ordered 72v 20ah portable lifepo4 (65a continuous, and 85amp peak discharge). Going to make a secondary 18650 which I'll explain further down
Wheel 7000w peak, but 72v x 90a is 6480w.
For kelly programming QS told me to put motor current at 100%, and battery current limit to about 70%.
so 70% of 120 is 84a. 72v at 84a = 6048watts. QS say that it can do 7000w peak
to get this exact number it would mean 97.22amps at 72v. This would mean setting the battery current limit to 81.01%. I dont want to damage the wheel or controller, but I still want max performance. I suppose I should just go with what QS is recommending?
The ebike being used
using 6awg wires and Zeva smart precharger
https://goo.gl/jPs5gp
main contactor SW80 NO (normally open) style Coil Voltage 72V 100A DC Contactor ZJW100A
https://goo.gl/lBlx1t
The controller
The battery
View attachment 18
View attachment 17
The QS wheel
High power DC converter 35a
https://goo.gl/AYGrUl
For use with air horns
Low power DC converter 10A (lights, precharger etc)
https://goo.gl/9lnMVj
Wolo Air horns
Model 419 12v 123.5 Decibels 530 / 680 Hz
https://goo.gl/0qrpvd
Model 619 12v 123.5 Decibels 320 Hz
https://goo.gl/yzLrZs
LED headlight bar
12" inch 72W Flood Spot Combo Current draw:6A@12 ?
http://a.co/5tlanAz
Trunk with LED (46 Ltr)
https://goo.gl/uKFm0l
Watt meter/Ammeter with 100a shunt - only $20 cad, didn't really need the whole Cycle Analyst for $160+ etc
https://goo.gl/rHU4X2
View attachment 3
View attachment 2
Some initial wiring - will be connecting the (+) out of ammeter to PWR so it gets turned off with ignition