My Chinese Ebay Build
Re: My Chinese Ebay Build
tires arrived today I will start looking for spokes now too.
- Attachments
-
- IMG_5041.JPG (62.06 KiB) Viewed 2174 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
signal lights arrived this afternoon while I was at work.
- Attachments
-
- IMG_5042.JPG (62.9 KiB) Viewed 2169 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
LED for my headlight arrived today. 18watts 6" wide.I bought 2 because they were cheap always good to have a spare.
- Attachments
-
- IMG_5045.JPG (62.2 KiB) Viewed 2153 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
Ordered Hydraulic brakes with switches from ebay today.
- Attachments
-
- $_12tty.jpg (15.49 KiB) Viewed 2139 times
-
- uty.jpg (17.45 KiB) Viewed 2139 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
Update on the old battery pack. The cells packs averaged about 15ah so instead of putting new cells I will remove a cell from each pack and it will be 12+ah then take 5 best cells out of the 15 and bring back to a 16s pack. 10 cells will be for whatever after.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
155mm dropout with 135mm hub shaft. I went out to my scrap pile and pulled some torque arms and spacers to fit the 135mm into the 155mm dropout. The torque arms and extra spacers are from e-scooter mounted inside the dropout will give a clean install. I will drill swing arm and bolt the torque arm ahead of the hub shaft. The dropout also has a clamping bolt.
- Attachments
-
- IMG_5046.JPG (50.33 KiB) Viewed 2138 times
-
- IMG_5047.JPG (59.1 KiB) Viewed 2138 times
-
- IMG_5048.JPG (63.28 KiB) Viewed 2138 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
Also I welcome anyone for suggestions as this is my first build and did not spend as much time before the build looking into other builds like I should have. Even if you would simply do something different. I went to one of the Ebike stores I have dealt with for a few years and told them of my build and they gave me the legal statement sticker. They said its just a statement and the Government tasks them with making and printing there own stickers that's why they all look slightly different.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
New brakes arrived with magnetic switches installed. Only 2 days from time of purchase in china to here. Big time saver for me.
- Attachments
-
- IMG_5049.JPG (56.17 KiB) Viewed 2123 times
-
- IMG_5050.JPG (47.38 KiB) Viewed 2123 times
-
- IMG_5051.JPG (45.55 KiB) Viewed 2123 times
-
- IMG_5052.JPG (54.98 KiB) Viewed 2123 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
Update. Parts are still coming in I had my kickstand arrive that was made specific for this frame and dc to dc box also arrived. More parts have been ordered. Because of size and bike layout the hoses on the new brakes were to short so I have new hose coming and bleed gear. I also ordered mudhugger front race and rear 29 fender, I ordered a premade front wheel 20mm hub 19" moto wheel (will review this in the moto wheel thread upon arrival) it cost almost the same as the rear I sourced all the parts for so I will paint rear wheel to match the front in black. The shock I ordered was too long by 30mm so I will make a ride height adjuster to dial in the stance and have adjustability. I will post more progress as parts arrive.
- Attachments
-
- IMG_5053.JPG (43.72 KiB) Viewed 2090 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
-
dirkdiggler 10 kW
- Posts: 586
- Joined: Oct 18 2012 1:31am
Re: My Chinese Ebay Build
From where did you order the premade 19" moto wheel with 20mm hubs? I'm looking for the same thing for my bike.
Re: My Chinese Ebay Build
https://electricrt.myshopify.com/collec ... ont-wheelsdirkdiggler wrote:From where did you order the premade 19" moto wheel with 20mm hubs? I'm looking for the same thing for my bike.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
-
dirkdiggler 10 kW
- Posts: 586
- Joined: Oct 18 2012 1:31am
Re: My Chinese Ebay Build
Thanks! I'll look into those. I saved a page on an older phone from a Chinese website that had completed motowheels. Of course can't find the site when I am ready to buy.
-
BeachRider2016 100 W
- Posts: 110
- Joined: Jul 13 2016 10:42am
- Location: North Carolinas
Re: My Chinese Ebay Build
Hi. Dont mean to hijack your post. Let me know if you want me to remove it.
But I finished a recent build with an identical frame except w/o kickstand. I also used a 19" dirtbike laced with 8G spokes! Reason for that because my hub is 3-5kw 10G spokes with washer doesnt feel safe. Front wheel is also 19" db rim but laced in stainless 14G with stainless washer ( I will drill it out to fit 12G spokes)
Its my E-dirtbike in disguise with bicycle pedal and have 7 gears lol.
Heres some pics. I will do a build thread soon, still waiting on a bms to finish my 20s battery.
Meanwhile it runs on 48v 13s20p ~50A lion bat.
All my stuff are sourced from Ebay too
But I finished a recent build with an identical frame except w/o kickstand. I also used a 19" dirtbike laced with 8G spokes! Reason for that because my hub is 3-5kw 10G spokes with washer doesnt feel safe. Front wheel is also 19" db rim but laced in stainless 14G with stainless washer ( I will drill it out to fit 12G spokes)
Its my E-dirtbike in disguise with bicycle pedal and have 7 gears lol.
Heres some pics. I will do a build thread soon, still waiting on a bms to finish my 20s battery.
Meanwhile it runs on 48v 13s20p ~50A lion bat.
All my stuff are sourced from Ebay too
- Attachments
-
-
My Ebike with chinese frame: https://endless-sphere.com/forums/viewtopic.php?t=83275
Re: My Chinese Ebay Build
your post is more than welcome nice to see a finished one give me some motivation. What rear disk size is that? I am having trouble getting my 203mm to work so am downsizing. Also what are your tire specs they look nice and light?BeachRider2016 wrote:Hi. Dont mean to hijack your post. Let me know if you want me to remove it.
But I finished a recent build with an identical frame except w/o kickstand. I also used a 19" dirtbike laced with 8G spokes! Reason for that because my hub is 3-5kw 10G spokes with washer doesnt feel safe. Front wheel is also 19" db rim but laced in stainless 14G with stainless washer ( I will drill it out to fit 12G spokes)
Its my E-dirtbike in disguise with bicycle pedal and have 7 gears lol.
Heres some pics. I will do a build thread soon, still waiting on a bms to finish my 20s battery.
Meanwhile it runs on 48v 13s20p ~50A lion bat.
All my stuff are sourced from Ebay too
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
-
BeachRider2016 100 W
- Posts: 110
- Joined: Jul 13 2016 10:42am
- Location: North Carolinas
Re: My Chinese Ebay Build
Those are 19" 70/100 offroad tires. For on road, i heard shinko are dual purpose.
My brakes are 203mm front/rear. The motor is 150mm so it fits nicely. You need to play with washers to get yours fit. Add some in between the adapter and mount since yours look like it has alot of room due to your 135mm axel.
Get your done for spring rides! cheers
My brakes are 203mm front/rear. The motor is 150mm so it fits nicely. You need to play with washers to get yours fit. Add some in between the adapter and mount since yours look like it has alot of room due to your 135mm axel.
Get your done for spring rides!
cheersMy Ebike with chinese frame: https://endless-sphere.com/forums/viewtopic.php?t=83275
Re: My Chinese Ebay Build
The new front wheel came complete and looks amazing it came from china so he must take the order then have them send it. Only problem is its a 17" not the 19" I ordered lol so I await his response.
- Attachments
-
- IMG_5056.JPG (65.15 KiB) Viewed 1968 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
He is sending a 19" and paying for shipping back for the 17" all is well.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
where did you get your brakes from? got a link?
Re: My Chinese Ebay Build
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
I asked how much he would want bottom dollar for the 17" seeing as he has to pay shipping but have not heard back. I don't really need it but could go in a future build. Still have not received any new tracking # for the 19" Has been a few days and I am getting a little antsykneedeep wrote:He is sending a 19" and paying for shipping back for the 17" all is well.
as the weather has been nice and I am only waiting on a couple small parts and should see the battery this week. I will drive on the mtb wheels for a couple weeks to be sure I am happy with the rest of the build.Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
-
smeagol222 100 W
- Posts: 134
- Joined: Dec 17 2015 7:36am
- Location: Toronto, Canada
Re: My Chinese Ebay Build
I totally know what you mean- weather has been weird lately. Yesterday 13deg C this morning -7deg C. I got my battery recently but there is still a lot of work to go before the bike is complete - late spring I hope
First project small E-scooter upgrade 1.5kw/3kw 48v 45a https://endless-sphere.com/forums/viewt ... 12&t=86228
Current project medium E-scooter upgrade 4kw/7kw 72v 90a https://endless-sphere.com/forums/viewt ... 10&t=85164
Current project medium E-scooter upgrade 4kw/7kw 72v 90a https://endless-sphere.com/forums/viewt ... 10&t=85164
Re: My Chinese Ebay Build
So the 19" is on its way has been shipped. I have talked to the seller an at a discounted price I might just keep the 17" for some future project. The shock I ordered was to long so I made a ride height adjuster and this will help once the 19" is on the back. should have more pictures this weekend. Also have the mounts for the headlight installed and to make a bracket to tie it all together. Getting much closer.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
Re: My Chinese Ebay Build
This has been a slow exhausting journey for me, I am not used to building with these type of bike parts. Sourcing parts is very tiring when I go to local bike shops 10-15X the price of ebay so I use ebay and wait a lot 
.
Here are a couple pictures of the temporary ride height adjuster I will use till I get the bike dialed in then order correct shock.
I also have a few pictures of the headlight mount. The brackets are for attaching lights to brush guards on trucks. I wrapped a dirtbike fork that was identical size with sandpaper and sanded out the mounts to an exact fit so it would not crush the fork and be a perfect fit. I then used a aluminium yard stick to cut and bend to mount the headlight. I will drill this and mount the LED headlight this week and I will add signals also.
. Here are a couple pictures of the temporary ride height adjuster I will use till I get the bike dialed in then order correct shock.
I also have a few pictures of the headlight mount. The brackets are for attaching lights to brush guards on trucks. I wrapped a dirtbike fork that was identical size with sandpaper and sanded out the mounts to an exact fit so it would not crush the fork and be a perfect fit. I then used a aluminium yard stick to cut and bend to mount the headlight. I will drill this and mount the LED headlight this week and I will add signals also.
- Attachments
-
- IMG_5066.JPG (67.82 KiB) Viewed 1875 times
-
- IMG_5061.JPG (65.95 KiB) Viewed 1875 times
-
- IMG_5062.JPG (62.93 KiB) Viewed 1875 times
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
-
BeachRider2016 100 W
- Posts: 110
- Joined: Jul 13 2016 10:42am
- Location: North Carolinas
Re: My Chinese Ebay Build
Nice rear shock adapter there.
My Ebike with chinese frame: https://endless-sphere.com/forums/viewtopic.php?t=83275
Re: My Chinese Ebay Build
Thanks, I can adjust the seat height by about 8" with it. Will come in handy setting up moto 19" and motocross seat when I get there.BeachRider2016 wrote:Nice rear shock adapter there.
Chinese Ebay build in progress https://endless-sphere.com/forums/viewt ... 12&t=86149 , been through half a dozen scooter ebikes..No More of those.
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?
I like to build it better than I can buy it. I like to think outside the box...Come to think of it where is that box?