24F Silent Controller 20kw 100-150v iOS/Android- $299>

Do the new models have a Cycle Analyst plug and/or does the app monitor and display current, Ah used, etc. now?
 
-please send also diamensions and weight.

BR
 
Did you get my email? Haven’t seen that invoice yet.
 
Powervelocity.com said:
Invoice is sent. Thanks.

Received with thanks. Is this including the GPS/Alarm?
 
Hi, I am interested in your 24F Controller. How much is it included with shipping to Germany? Please come back to me via PM.

Best regards, Elias
 
I need one of the 24f controllers with the built in Bluetooth,GPS,Alarms,At the 120volt option can you make it plug and play for my CA,Throttle,3speed switch and my cromotor. You can send my invoice to taushabrummitt32@gmail.com or pm me here.
 
ecross said:
Hello!

-need plug and play version with:

for:
-24S16P Sanyo 3500GA
-Motor: 4503 with watercooling future 273

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets

-how much for a plag and play version with this settings?

BR


-still looking for a offer
 
PM your PayPal email address and requirements and we'll send the invoice.

ecross said:
ecross said:
Hello!

-need plug and play version with:

for:
-24S16P Sanyo 3500GA
-Motor: 4503 with watercooling future 273

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets

-how much for a plag and play version with this settings?

BR


-still looking for a offer
 
And the 6 fet one , with bluetooth, and Smart Phone / Tablet Software/Firmware so I can use my Smart Phone as the Display to display Current Watts and Amps being used, current speed , etc.

I am not seeing it up on your website. ?




Powervelocity.com said:
We can do that.

steven7601 said:
Good ahead and make mine the 150volt option instead of the 120 voltage one
 
6F controllers are currently in production and should be available in a couple of weeks.
The dashboard functionality for iOS and Android is coming as well.

ScooterMan101 said:
And the 6 fet one , with bluetooth, and Smart Phone / Tablet Software/Firmware so I can use my Smart Phone as the Display to display Current Watts and Amps being used, current speed , etc.

I am not seeing it up on your website. ?




Powervelocity.com said:
We can do that.

steven7601 said:
Good ahead and make mine the 150volt option instead of the 120 voltage one
 
ecross said:
ecross said:
Hello!

-need plug and play version with:

for:
-24S16P Sanyo 3500GA
-Motor: 4503 with watercooling future 273

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets

-how much for a plag and play version with this settings?

BR


-still looking for a offer with my needed settings for my 24S Sanyo battery, to info@vektor-technik.de
 
Invoice is sent. I need more details on connectors you need.

ecross said:
ecross said:
ecross said:
Hello!

-need plug and play version with:

for:
-24S16P Sanyo 3500GA
-Motor: 4503 with watercooling future 273

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets

-how much for a plag and play version with this settings?

BR


-still looking for a offer with my needed settings for my 24S Sanyo battery, to info@vektor-technik.de
 
no invoice sent!
-have Lyen
-need Lyen connector setup
-for Battery and Motor I use XT150

Powervelocity.com said:
Invoice is sent. I need more details on connectors you need.

ecross said:
ecross said:
ecross said:
Hello!

-need plug and play version with:

for:
-24S16P Sanyo 3500GA
-Motor: 4503 with watercooling future 273

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets

-how much for a plag and play version with this settings?

BR


-still looking for a offer with my needed settings for my 24S Sanyo battery, to info@vektor-technik.de
 
If it's your email address on this invoice, then it was sent. I am going send another copy just in case, but maybe check your spam filter or see of something else is blocking it. Sounds like your ISP or the service that is hosting your email is having issues.

Capture.PNG

ecross said:
no invoice sent!
-have Lyen
-need Lyen connector setup
-for Battery and Motor I use XT150
 
-have Lyen controller
-need Lyen connector setup
-for Battery and Motor I use XT150
-is this possible?
 
the current connectors are not the problem, thanks, but

for:
-24S16P Sanyo 3500GA

-LVC: 72V
-Regen: 100V with yello and black wire, have e-Brake on handlebar, about 30A Regen possible?
-battery current: 150A
-Phase current: 350A
-3-speed switch with 25%, 50%, 100%

-120V Fets welcome, or only the best Fets, please send FET type

-how much for a plag and play version with this settings?
 
Back
Top