deronmoped
10 kW
- Joined
- Oct 6, 2008
- Messages
- 706
I had a couple of magnets come loose inside my outrunner. I have tried two types of epoxy (JB weld was one of them), but they did not work. I just tried Gorilla glue, polyurethane foaming type to see if it will work. I ran the motor a little with the Gorilla glue, but I expect it to fail too. Each time I clean up the surfaces and sand them. I clamp the magnets and wait for full cure. Anybody find a glue that works? I have used silicone to glue my rear view mirror to my windshield and that works in that application (metal to glass).