Overclocker
10 kW
since these cells are a bit older i'm expecting to do a bit more balancing on them. the objective is to be able to simply plug in this gadget into the group that needs balancing. since each channel is independent it'll simply charge its channel up to 4.20v and stop. this is just a prototype so i'm starting out with just 6 channels.
these are cheap TP4056 charging boards. no "F" logo on the chips so they're counterfeits
since you can't use a common power supply i'll be using 6 independent power supplies: Ktec 5v 2a wall warts (UL Listed!)
to be continued...