Vector bike and frame owners.

Show off your E-bike creation here.
User avatar
miunchy   1 mW

1 mW
Posts: 16
Joined: Nov 24 2016 1:28pm
Location: Vilnius, Lithuania

Re: Vector bike and frame owners.

Post by miunchy » Aug 06 2017 2:28pm

madin88 wrote: Now i am using the stands from the chinese EEB frame which costs less than half (25USD vs 55USD the crap from vetcor), have felt like half the weight and so far they handle the weight well 8)
Madin, can you please place a link where i can buy this stand, thanks.
My rides: https://www.youtube.com/channel/UC4rx5u ... yCxNPJNpkw
Vector 14kW midiE, Merida 1.5kW Magic Pie 4

Dumsterdave   100 W

100 W
Posts: 215
Joined: May 09 2016 5:26am
Location: copenhagen, Denmark

Re: Vector bike and frame owners.

Post by Dumsterdave » Aug 07 2017 12:46am

when is the new website up?

User avatar
madin88   100 MW

100 MW
Posts: 2933
Joined: May 27 2013 2:02am
Location: Austria

Re: Vector bike and frame owners.

Post by madin88 » Aug 07 2017 11:05am

miunchy wrote: Madin, can you please place a link where i can buy this stand, thanks.
https://endless-sphere.com/forums/viewt ... 9#p1284149

as mentioned in this topic i asked C&N ebike on Alibaba. it's not listed in theire assortment.

https://leilicn.en.alibaba.com/?spm=a27 ... 0.0.qd8sb7
- 10kW belt drive with Neumotor 8057: viewtopic.php?f=30&t=91144&start=50#p1377787
- Fully road legal (L1E approval) e-bike based on Votec V-FR frame
/ MXUS 3T / 17" Mitas MC11 / Adaptto Max-E / 20s12p 25R
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

User avatar
Artur   100 kW

100 kW
Posts: 1074
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Aug 16 2017 2:46pm




User avatar
macribs   1 GW

1 GW
Posts: 3488
Joined: Jul 22 2014 5:59pm

Re: Vector bike and frame owners.

Post by macribs » Aug 16 2017 7:36pm

Nice Artur!

When do you have some more detailed information about the new mid drive? Like final specs, price and when we can put in our order?

User avatar
Artur   100 kW

100 kW
Posts: 1074
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Sep 01 2017 12:34pm

here we go

Image

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Sep 23 2017 12:18pm

new motor on the vector bike:mxus 3k turbo 3T topspeed 19inch wheel:75kmh-gps on the 18s Sanyo nmc 25Ah VW e-up cells.
Sabvoton controller 125 battery amps-250 Phase goes crazzy :shock: volt drops maximum 2V on the total 18s pack(0,11V cell) so these cells can take 100Amp easy.
Upgrade the battery wires to 7awg,upgrade the rear brake 203mm disc.
On/off switch+volt display no more extra wires and big displays on the bike :mrgreen:
range 40-70km....a lot hard riding gives me 45km range.
I have a 3 speed freewheel and waiting for the chain parts(wider size for the 3speed).
just a pic how the bike looks.
Image
Image
Image

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 01 2017 10:12am

Finally chain+chaintensioner wurks perfect,pedal easy 20kmh no motorpower.
Mount a compleet Magura MT5 4 piston 203mm brake kit front-rear.Very strong brakes
Front suspension Magura usd old spring style,no oil leaks verry hard and wurks perfect on the heavy bike :mrgreen:
The front+back wheel i like to make them mat-black for the compleet good look(chrome to shiney and the front doesnt match)
Tires 3.0 give the bike a real steady feeling@speeds above 40kmh.
The only thing i hat now is the sound of the freewheel :x the motor/controller are super quiet.
Image
Image
Image
Image

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 15 2017 12:31pm

Vector bike is ready and i am happy with the look,wheels front+back black looks good to me 8)
Image
Image
dubbel shrink the vw e-up 25Ah cells,smal holes on the terminals to check the ballans.
Image

rumme   100 kW

100 kW
Posts: 1377
Joined: Jan 28 2011 7:47pm

Re: Vector bike and frame owners.

Post by rumme » Oct 15 2017 1:02pm

Joachim, how much money di you have in your ebike ? Looks nice.

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 16 2017 12:57am

Not to much i start with the frame and put the rest on the frame step by step.
Frame 600Euro.
Brakes magura mt5 203mm 200Euro.
Fox rear schock 150Euro.
front fork magura-second hand 125Euro.
steering-bar-progrip grips etc 100Euro.
Mxus 3k turbo 3T 19inch mc wheel 400Euro.
rims-tubes 3inch rear+front 130Euro
Chain-freewheel 30Euro.
controller sabvoton 96150 200Euro.
Battery 18 big li-nmc vw e-up cells 18s 25Ah 1.6kwh 400Euro.
Total like 2400Euro....

User avatar
DasDouble   100 kW

100 kW
Posts: 1145
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 16 2017 2:08am

Joachim wrote:Not to much i start with the frame and put the rest on the frame step by step.
Frame 600Euro.
Brakes magura mt5 203mm 200Euro.
Fox rear schock 150Euro.
front fork magura-second hand 125Euro.
steering-bar-progrip grips etc 100Euro.
Mxus 3k turbo 3T 19inch mc wheel 400Euro.
rims-tubes 3inch rear+front 130Euro
Chain-freewheel 30Euro.
controller sabvoton 96150 200Euro.
Battery 18 big li-nmc vw e-up cells 18s 25Ah 1.6kwh 400Euro.
Total like 2400Euro....
Wooohow thats cheap as hell... I have spend about <twize that much... Well.. But I also use a better battery(3kWh; 18kW max), some more motorcycle parts and an Adaptto..
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 16 2017 12:41pm

Yes a good battery from 18650 cells cost a lot...3kwh for sure :shock:( bigger and better are not the same :wink: )
I think the sabvoton is a great controller for the money,runs very cool and silent/smooth.

User avatar
DasDouble   100 kW

100 kW
Posts: 1145
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 16 2017 1:43pm

Joachim wrote:Yes a good battery from 18650 cells cost a lot...3kwh for sure :shock:( bigger and better are not the same :wink: )
I think the sabvoton is a great controller for the money,runs very cool and silent/smooth.
Cool, I will try the Sabvaton next time. <Thumbs Up>.
Yes, really 3kWh. 20s15p. 20×15×2,67Ahx3,7 ~ 3kWh. And 16Ax15x20x3,7 ~ 18kW. (16,6kW continuous)
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 17 2017 12:31am

20s 15p-300 cells...big battery 14 kilo? 2.88kwh :mrgreen:

User avatar
DasDouble   100 kW

100 kW
Posts: 1145
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 17 2017 1:56am

Joachim wrote:20s 15p-300 cells...big battery 14 kilo? 2.88kwh :mrgreen:
Yeah something about that.. I guess its about 15kg but never gets hot as its overpowered as much as possible :D just fits perfectly into the Vector #1 frame.
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 17 2017 8:17am

Yes thes cells never got hot never see max amp drawn,long live battery 8) I have build some of these vw cells in a 2 person pedal assist duo bike a view weeks a go:the guy cald me this week and the bikes range is 400km :lol: i put 10s 2p on the duo van raam bike so 18kwh :mrgreen:
i have to make a second battery for a 3 wheel van raam bike 10s 1p 36v 25Ah.order already 1 module....12 cells so i have 2 cells left,i can go to 20s in the Vector( i have to check the used cells and the new cells first).

User avatar
DasDouble   100 kW

100 kW
Posts: 1145
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 17 2017 4:55pm

Joachim wrote:Yes thes cells never got hot never see max amp drawn,long live battery 8) I have build some of these vw cells in a 2 person pedal assist duo bike a view weeks a go:the guy cald me this week and the bikes range is 400km :lol: i put 10s 2p on the duo van raam bike so 18kwh :mrgreen:
i have to make a second battery for a 3 wheel van raam bike 10s 1p 36v 25Ah.order already 1 module....12 cells so i have 2 cells left,i can go to 20s in the Vector( i have to check the used cells and the new cells first).
Haha, you mean that one? Lol :mrgreen: :lol: :D Easy money :)

Image
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 18 2017 5:04am

Yes...they are not cheap:4000-7000Euro

Burnt75   100 µW

100 µW
Posts: 7
Joined: Nov 02 2017 3:08pm
Location: Monroe, Louisiana USA

Re: Vector bike and frame owners.

Post by Burnt75 » Dec 06 2017 10:14am

Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.

User avatar
macribs   1 GW

1 GW
Posts: 3488
Joined: Jul 22 2014 5:59pm

Re: Vector bike and frame owners.

Post by macribs » Dec 06 2017 2:15pm

Rims are hard to paint, or rather they are tough to get a lasting paint job. All kinds of scratches, dust from brake pads, sand, rocks and stones always working the finish of the rims. I would either do it cheap as possible, like plasti dip. Or powder coat. I tried to paint a set of 19" mc rims. Even with proper prep work, sanding, base coat, paint and then clear to seal it all didn't last. When I swapped for a lighter and smaller 19/18"rim set I opted for powder coating. Tough as nail. No more chipping.

Joachim   1 kW

1 kW
Posts: 416
Joined: Jul 30 2015 1:02pm

Re: Vector bike and frame owners.

Post by Joachim » Dec 10 2017 5:16pm

Burnt75 wrote:
Dec 06 2017 10:14am
Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.
You need the right paint.i have paint alluminium car wheels with the same mat black paint....winter summer stil holding strong and looks good-easy to clean. Use the special motip allu paint for alluminium wheels,first sanding waterproof 2000 and 4 layers paint will hold good and the looks are perfect.

Burnt75   100 µW

100 µW
Posts: 7
Joined: Nov 02 2017 3:08pm
Location: Monroe, Louisiana USA

Re: Vector bike and frame owners.

Post by Burnt75 » Dec 10 2017 7:43pm

Joachim wrote:
Dec 10 2017 5:16pm
Burnt75 wrote:
Dec 06 2017 10:14am
Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.
You need the right paint.i have paint alluminium car wheels with the same mat black paint....winter summer stil holding strong and looks good-easy to clean. Use the special motip allu paint for alluminium wheels,first sanding waterproof 2000 and 4 layers paint will hold good and the looks are perfect.
Thanks. Yours look great. What fender is that? Just the right size.

User avatar
Artur   100 kW

100 kW
Posts: 1074
Joined: Jul 03 2014 3:29am

Re: Vector bike and frame owners.

Post by Artur » Dec 17 2017 12:46pm

Image

Image

Image

Image

photos from swiss. friend visit. motor was 50C max. so easy to handle. SILENT! pure joy!

User avatar
DasDouble   100 kW

100 kW
Posts: 1145
Joined: Jul 12 2015 1:35pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Dec 19 2017 3:44am

Awesome pics! I like the mudguards of these.. Are they a different sort then you sell? Where to get them?
Mechatronics-Engineering Student
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Post Reply