Just received part of my kit from bmsbattery
Got the q128c motor kit
I'm a little stuck on the brakes.
The kit contains cable brake cutoffs where I need hydraulic cutoff brakes
The wiring harness I have appears to have the 2 pin red connectors for the brake switches
All of the brakes I've been looking at have the 3 pin bafang yellow connectors
My current brakes are avid db1 (sram) hydraulic brakes. I thought this would be a good chance to upgrade this.
Is there any sensors with the 2 pin connectors people would recommend?
If not would this adapter work ? https://www.e-bike-technologies.de/index.php/en/adapter-and-y-adapter-en/adapter-higo-s3-b2-a
I quite like these here but would need some kind of adapter
https://lunacycle.com/shimano-deore-m615-hydraulic-brake-set-with-bafang-ebrake-cut-off/
My other option is the Tektro dorado, but then I'd still need the 3 to 2 pin adapters
Got the q128c motor kit
I'm a little stuck on the brakes.
The kit contains cable brake cutoffs where I need hydraulic cutoff brakes
The wiring harness I have appears to have the 2 pin red connectors for the brake switches
All of the brakes I've been looking at have the 3 pin bafang yellow connectors
My current brakes are avid db1 (sram) hydraulic brakes. I thought this would be a good chance to upgrade this.
Is there any sensors with the 2 pin connectors people would recommend?
If not would this adapter work ? https://www.e-bike-technologies.de/index.php/en/adapter-and-y-adapter-en/adapter-higo-s3-b2-a
I quite like these here but would need some kind of adapter
https://lunacycle.com/shimano-deore-m615-hydraulic-brake-set-with-bafang-ebrake-cut-off/
My other option is the Tektro dorado, but then I'd still need the 3 to 2 pin adapters