minde28383
10 kW
- Joined
- Apr 2, 2010
- Messages
- 700
Got my new 24fets. Trying to hook it up with 205 hub. Getting error - mtOverTemp: My hub is without temp sensor installed. What are the options so that controller would be able to start?
Ps.
Installing temp sensor is not an option at the moment.
I don't find option to switch off or change motor temperature limits in the app. App version & print screen attached. You can see app show150C and error messge in red color. Keep in mind that three input fields you see are for controller temperature limits and not for motor temperature limits.
My controller is 72150, the controller version with motor temperature sensor which has 6 wires in the same connector, 5 of these wires are for halls and 1 - for temperature.
Ps.
Installing temp sensor is not an option at the moment.
I don't find option to switch off or change motor temperature limits in the app. App version & print screen attached. You can see app show150C and error messge in red color. Keep in mind that three input fields you see are for controller temperature limits and not for motor temperature limits.
My controller is 72150, the controller version with motor temperature sensor which has 6 wires in the same connector, 5 of these wires are for halls and 1 - for temperature.