E-bike + carbon frame + 52V. 18650 + BMC motor

Hello guys,

Some material arrive. One chain, I bought from e-bay...take 75days to arrive. From the U.S.A. to Europe. Can you belive ? Now, I have 2...diferent color.

Luis.
 

Attachments

  • DSC_0785.JPG
    DSC_0785.JPG
    373.5 KB · Views: 4,898
  • DSC_0786.JPG
    DSC_0786.JPG
    101.3 KB · Views: 4,898
  • DSC_0787.JPG
    DSC_0787.JPG
    129.1 KB · Views: 4,898
  • DSC_0794.JPG
    DSC_0794.JPG
    227.7 KB · Views: 4,898
  • DSC_0799.JPG
    DSC_0799.JPG
    190.1 KB · Views: 4,898
Hi guys,

Finnaly, I finnish the atach points, for the side panels. It was a lot of work, and very precise.
I already have the side panels cut 80%. Its fine tunning.
I can see the finish line....far way...but I can see... :wink:

Luís.
 

Attachments

  • DSC_0850.JPG
    DSC_0850.JPG
    108.2 KB · Views: 4,737
  • DSC_0851.JPG
    DSC_0851.JPG
    123.1 KB · Views: 4,736
  • DSC_0853.JPG
    DSC_0853.JPG
    179.1 KB · Views: 4,736
  • DSC_0866.JPG
    DSC_0866.JPG
    220.6 KB · Views: 4,736
  • DSC_0875.JPG
    DSC_0875.JPG
    223.7 KB · Views: 4,737
  • DSC_0873.JPG
    DSC_0873.JPG
    397.1 KB · Views: 4,737
Hi guys,

Its time to finish the side plates. Its going to be 1.5mm alluminium. They are cut to 80%. Today I find the location off the srews...I use acrylic , and then transfer the location off the screws to the alluminium.
After they are atached I tune to 100%.
In the first picture, it already have the acrylic atached. Its hard to see.

Luis.
 

Attachments

  • DSC_0880.JPG
    DSC_0880.JPG
    352.1 KB · Views: 4,694
  • DSC_0882.JPG
    DSC_0882.JPG
    237.4 KB · Views: 4,695
  • DSC_0888.JPG
    DSC_0888.JPG
    168.5 KB · Views: 4,695
  • DSC_0893.JPG
    DSC_0893.JPG
    225.8 KB · Views: 4,695
  • DSC_0886.JPG
    DSC_0886.JPG
    93.5 KB · Views: 4,694
Hi guys,

SlowCo, thanks men. Glad you like.
the12be, as always, thanks. And thanks for pay attention.
kachou, welcome. The battery box, is 28cm long x 23cm hight x 30cm on diagonal. And 15cm widht. And the frame, I fund just one size.

Luis.
 

Attachments

  • DSC_0897.JPG
    DSC_0897.JPG
    243.8 KB · Views: 4,643
  • DSC_0899.JPG
    DSC_0899.JPG
    186 KB · Views: 4,643
  • DSC_0900.JPG
    DSC_0900.JPG
    222 KB · Views: 4,643
  • DSC_0902.JPG
    DSC_0902.JPG
    267.6 KB · Views: 4,643
That box is big enough to hold a LOT of battery.... How many volts/aH? Looking great!
 
Hi guys,

Wolfeman, the battery box, looks big, but its not. The frame is a S. Small. It will be 100volts 10amps off lipo. 24s 1p. In the future, I will use 18650.
skeetab5780, its 2cm more wide, than necessary...but thats the material I could find was 15cm wide, and I need 13cm. Thats ok, 2cm for foam.

Luis.
 

Attachments

  • DSC_0157.JPG
    DSC_0157.JPG
    105.8 KB · Views: 4,235
  • DSC_0158.JPG
    DSC_0158.JPG
    106.7 KB · Views: 4,235
That is going to be a quick bike, looking forward to seeing your lipo pack. Thanks Luis.
 
Back
Top