Hi
I have bought and installed the CA3 some time ago but I have an issue:
* I live in Europe so im using PAS and have limited speed to around 25 km/h
* Throttle only for 0-5 km/h
* Front hub MAC 700W
* Controller Infineon
The problem is that when going downhill I will exceed the 25km/h setting (even without power from the motor) and once the downhill flattens out there will be several seconds delay before the power comes back so my speed easily drops down to 20 km/h before getting power again. (just to clarify exeeding 25km/h is not the problem but the following drop/delay) in power).
Could it be the setting of the PID that I should change? Seems like a too long delay to be PID-related (I have not changed any PID settings)
If you need any more input please let me know!
I have bought and installed the CA3 some time ago but I have an issue:
* I live in Europe so im using PAS and have limited speed to around 25 km/h
* Throttle only for 0-5 km/h
* Front hub MAC 700W
* Controller Infineon
The problem is that when going downhill I will exceed the 25km/h setting (even without power from the motor) and once the downhill flattens out there will be several seconds delay before the power comes back so my speed easily drops down to 20 km/h before getting power again. (just to clarify exeeding 25km/h is not the problem but the following drop/delay) in power).
Could it be the setting of the PID that I should change? Seems like a too long delay to be PID-related (I have not changed any PID settings)
If you need any more input please let me know!