DasDouble
100 kW
Hey guys,
I ordered a motor for a friend of mine some time ago from QS motors a QS 1000W 135mm 205 35H V1 for a standard mtb bicycle. Now a problem occoured: the axle of the motor is 0,65mm too thick for his dropout (10.25mm axle and 9.6mm the dropout).
Now the question is: How to solve that problem? Maybe grind it down a bit so it fits? He´s going to push about 4kW (Adaptto Mini-E Controller) with it, so maybe it could brake because of that weakening? :?
What do you guys think?
Secondly: The cable rubs on the brake rotor. Normally that shouldn´t be a problem at all as you just have to lead away the cable downside the axle so it goes through the dropout and doesn´t have to get bended towards the rotor, right? Has someone also have had such issue before?
Thanks for your help!
Regards, Elias
I ordered a motor for a friend of mine some time ago from QS motors a QS 1000W 135mm 205 35H V1 for a standard mtb bicycle. Now a problem occoured: the axle of the motor is 0,65mm too thick for his dropout (10.25mm axle and 9.6mm the dropout).
Now the question is: How to solve that problem? Maybe grind it down a bit so it fits? He´s going to push about 4kW (Adaptto Mini-E Controller) with it, so maybe it could brake because of that weakening? :?
What do you guys think?
Secondly: The cable rubs on the brake rotor. Normally that shouldn´t be a problem at all as you just have to lead away the cable downside the axle so it goes through the dropout and doesn´t have to get bended towards the rotor, right? Has someone also have had such issue before?
Thanks for your help!
Regards, Elias