Charger recommendations

Go for the iCharger if you are doing RC Charger, dont skimp on the charging amps. Like the $20 iMax 6S charger takes a long time.

iCharger - http://www.buddyrc.com/charging-systems/charger/icharger.html
I'd go with this one if I wanted to save a bit
http://www.buddyrc.com/icharger-308-duo.html
or this one is the best one to get
http://www.buddyrc.com/icharger-4010-duo.html
then there are these
http://www.buddyrc.com/icharger-3010b.html
or
http://www.buddyrc.com/icharger-1010b.html

You'd want 8S or 10S, skip the 6S.


Justin at www.ebikes.ca sells a good Satiator charger, doesnt do balancing
http://www.ebikes.ca/shop/electric-bicycle-parts/chargers.html
http://www.ebikes.ca/documents/Satiator_Manual_V1.0FW.pdf

Out of the box charging, Meanwell HRP are good.
https://www.mouser.com/search/refine.aspx?N=4294759007&Keyword=meanwell%20hrp

You might have to put two in series to get your voltage which you can adjust, but you can not adjust the amps. If you have a 10Ah pack, best to get a 10A unit. Series you add the voltage and the current stays the same.
 
https://em3ev.com/shop/54v6-charger/?currency=USD

The option for 80-90-100% charge settings model is the one I would get for a decent inexpensive charger.
 
I couldn't be happier now that I have a revoletrix gt1000duo. Massive out put power so you need some massive server power supplies to feed it.
 
Take a look at the Meanwell HLG's in the classified section. Great deal @ 35.00 shipped. Quality should be commercial quality vs. the average plastic or kingpan charger.
 
If I had to do it all over again I'd spend the money and get the goods...
https://www.amainhobbies.com/junsi-icharger-4010duo-multichemistry-dc-battery-charger-10s-40a-2000w-jun-4010duo/p256250
 
Back
Top