Dui ni shuo de dui
10 kW
Hello Everyone,
I'm currently going through the process of sourcing all the little hardware for my build, and right now I'm searching for the best compromizes in tems of power connectors.
A little reminder of my config should help:
2 batteries in parrallel. Each battery is 72V and 40AH, so 80AH in total. I need those to be able to push around 600 Amps continous.
So I need the connectors that can withstand that kind of current. Basically, what I need is:
-One connector for each battery, each being able to reach 300A continous without melting.
-One connector to link both paralleled batteries to the controller, able to withstand the total amperage of both, so 600A continous.
I thought about using Anderson connectors, but they are big and bulky.
Is there anything better you could recommend?
Any suggestion is very welcomed!
Thanks in advance,
I'm currently going through the process of sourcing all the little hardware for my build, and right now I'm searching for the best compromizes in tems of power connectors.
A little reminder of my config should help:
2 batteries in parrallel. Each battery is 72V and 40AH, so 80AH in total. I need those to be able to push around 600 Amps continous.
So I need the connectors that can withstand that kind of current. Basically, what I need is:
-One connector for each battery, each being able to reach 300A continous without melting.
-One connector to link both paralleled batteries to the controller, able to withstand the total amperage of both, so 600A continous.
I thought about using Anderson connectors, but they are big and bulky.
Is there anything better you could recommend?
Any suggestion is very welcomed!
Thanks in advance,