VelluK
1 W
My MXUS V3 hub motor get really hot when driving by bike. I made 30 min test drive and controller cut the power to the motor couple of times. Motor temperature limit was set to 130 C degrees (266 F).
It's interesting to know is this normal temperature for the Mxus V3 motor or is it too much for the motor? What would be the good high temperature limit for this motor?
And is there any magic tricks what I can do for the motor to get the temperature down? I have already put 5 ml ferrofluid to the motor. Motor is 5Tx12 / 7,2 kV model and I have 21" moto wheel at back.
It's interesting to know is this normal temperature for the Mxus V3 motor or is it too much for the motor? What would be the good high temperature limit for this motor?
And is there any magic tricks what I can do for the motor to get the temperature down? I have already put 5 ml ferrofluid to the motor. Motor is 5Tx12 / 7,2 kV model and I have 21" moto wheel at back.