Allex
100 MW
Yup!
Allex said:Yup!
Rix said:Allex said:Yup!
Thank you field weakening.
liveforphysics said:Rix said:Allex said:Yup!
Thank you field weakening.
It's like nitrous for EV top end power bands, but has the lamest name ever for how awesome it is.
liveforphysics said:[e=Rix post_id=1393886 time=1531260175 user_id=26076]
[qe=Allex post_id=1393853 time=1531250966 user_id=23342]Yup![
Thank you field weakening.
brumbrum said:It's hard to keep up with this fasting moving topic, so apologies if this has already been covered, but it seems the Suron has been cloned....
Anyone have any background on the 'VIAR e cross' bike?
stonezone said:I’m throwing 18s on the stock controller today. Will report back.
It's hard to keep up with this fasting moving topic, so apologies if this has already been covered, but it seems the Suron has been cloned....
Anyone have any background on the 'VIAR e cross' bike?
stonezone said:18s works fihe on stock controller, 20s anyone?
i'm jonesing for that new controller...
stonezone said:18s works fihe on stock controller, 20s anyone?
i'm jonesing for that new controller...
fechter said:stonezone said:18s works fihe on stock controller, 20s anyone?
i'm jonesing for that new controller...
I think 20s would be asking for smoke as you might be 84v at full charge and some of the parts are rated for 80v. We still have no idea what FETs are being used either.
rcmonstermike said:Just about 13" of ground clearance with the new lift - also a picture with the new forks, but no linkage - chopped out(front wheel on lower ground, too - it was worse than the picture shows).
rcmonstermike said:Very nicely done Mike, thats impressive you designed that linkage in a day. I my uncle Norman Kouba is the owner/founder/producer of KoubaLink. Another distant relative of mine owns YamaLink. It amazes me how much design goes into a simple "linkage" modification. Delron bushings are actually really awesome, provided water and dirt can be kept away from them. On your rear linkage, what kind of increase travel to shock ratio did you get? I am guessing since you added about 12.54mm of over all travel increase, its not significant. Worst case scenario is you go to a 500# spring on the shock. So, with the MOnster T up front, got a ride report for us yet?
rcmonstermike said:28.4 degrees....about .3 degrees less than my electricmoto blade(28.7), which uses the same forks, and identical to my ktm 350xcf. Didn't calibrate, but the 3 bikes show apples to apples comparison.
Rix said:Very nicely done Mike, thats impressive you designed that linkage in a day. I my uncle Norman Kouba is the owner/founder/producer of KoubaLink. Another distant relative of mine owns YamaLink. It amazes me how much design goes into a simple "linkage" modification. Delron bushings are actually really awesome, provided water and dirt can be kept away from them. On your rear linkage, what kind of increase travel to shock ratio did you get? I am guessing since you added about 12.54mm of over all travel increase, its not significant. Worst case scenario is you go to a 500# spring on the shock. So, with the MOnster T up front, got a ride report for us yet?