John and Cecil
10 kW
- Joined
- Mar 14, 2018
- Messages
- 529
casainho said:No it is not. There are features that would be impossible to have, like configuring the battery max current value or even battery low voltage, etc on the LCD. The OpenSource firmware needs KT-LCD3 and the tools needed to install the firmware on the TSDZ2 motor controller are the same to install the LCD3 firmware.John and Cecil said:Does anyone know if the opensource firmware is compatible with the stock 8pin vlcd5 display?
Thank you Casainho. I found the lcd3 display on ebay, and I think there is a 20% off coupon today too. If I order the kt-lcd3 display (24/36/48v) I guess I would need to get a new throttle too? Does the stock throttle connect to the lcd3 display or would I need to get a different throttle with a different connector, or does it need to be connected directly to the controller? I broke the thumb lever off my throttle recently so I need to order a new one anyway. I think I can order everything today, including a 3rd battery so I will be able to test a 15s2p 56v battery with it once all the parts arrive. I assume the display hooks up to the stock display connector?