Altair
1 kW
If we just had a schematic of the Adaptto, it would be sooooo simple to troubleshoot the different problems that appeared throughout the years.
I haven't followed the thread, so I don't know about the mod. Probably a resistor in series with the wiper of the pot.
Or if we want to limit the range of voltage to the same as a Hall sensor (0.8V - 4.0V), we could add... let me calculate, 1560 ohms to the +5V line, and 1250 ohms to the GND line, for a 5K pot.
That CTS pot is a very high quality one, should last forever if current or thermal limits are not exceeded.
I haven't followed the thread, so I don't know about the mod. Probably a resistor in series with the wiper of the pot.
Or if we want to limit the range of voltage to the same as a Hall sensor (0.8V - 4.0V), we could add... let me calculate, 1560 ohms to the +5V line, and 1250 ohms to the GND line, for a 5K pot.
That CTS pot is a very high quality one, should last forever if current or thermal limits are not exceeded.