teslanv
1 MW
Went for the first test ride this weekend. Gotta say I like it.
With a Stock 42T Front Chainring and 42T tall rear, it threw me off the bike. Lost a flip flop (sandal) in the process, also, but did manage to stay on my feet, at least.
A couple more notes for guys still building:
PAS Set-up:
1. Be sure to swap the PAS's +10V power supply from the CA to a +5V pad (internally in the CA) so you don't fry the Sensor in the BBSHD.
2. I had to configure the CA for 5V=REV for PAS to work correctly for me.
This project has been a fun one. A bit of a learning curve with the PR programming, but as always, the sphere is a Godsend. Where any of us would be without it, I don't know...
Keep on building!
With a Stock 42T Front Chainring and 42T tall rear, it threw me off the bike. Lost a flip flop (sandal) in the process, also, but did manage to stay on my feet, at least.
A couple more notes for guys still building:
PAS Set-up:
1. Be sure to swap the PAS's +10V power supply from the CA to a +5V pad (internally in the CA) so you don't fry the Sensor in the BBSHD.
2. I had to configure the CA for 5V=REV for PAS to work correctly for me.
This project has been a fun one. A bit of a learning curve with the PR programming, but as always, the sphere is a Godsend. Where any of us would be without it, I don't know...
Keep on building!