tomjasz
1 GW
district9prawn said:No more spot welding!!!
I wish I could say, that but for me different methods seem to be needed for differing circumstances.
district9prawn said:No more spot welding!!!
BlueSwordM said:@agnesium, I have an interesting question about your modules.
Since they don't see to use any kind of spring component, doesn't that mean that if there's a big bump in the road, or that the battery pack drops, the kinetic energy of the drop will have to go somewhere, and will perhaps collapse the positive terminals of the cells?
On Budgetlightforum, we do like the types of contacts in flashlights which you use in your no-solder module since they can handle very high currents. However, we tend to not like it very much, since upon a drop, many people have experienced a collapsed positive terminal when their flashlight, and one of these cases resulted in a shorted cell.
Just a small concern, thank you.
BlueSwordM said:@agnesium, I have an interesting question about your modules.
Since they don't see to use any kind of spring component, doesn't that mean that if there's a big bump in the road, or that the battery pack drops, the kinetic energy of the drop will have to go somewhere, and will perhaps collapse the positive terminals of the cells?
On Budgetlightforum, we do like the types of contacts in flashlights which you use in your no-solder module since they can handle very high currents. However, we tend to not like it very much, since upon a drop, many people have experienced a collapsed positive terminal when their flashlight, and one of these cases resulted in a shorted cell.
Just a small concern, thank you.
AKA "fish paper" and "barley paper" gasketswhereswally606 said:googled garolite gasket ring didn't get much, do you have a link?
MJSfoto1956 said:I have to congratulate you on your clever, well-thought-out design. I think your pricing is more than fair for the additional value provided by your solution. I will be building a battery pack next spring and I plan on purchasing your kits. One question though: if I order (40) 8p NESE modules and also specify a specific color (e.g. yellow) is the total additional cost still just €15.00 per color?
Thanks!
M
whereswally606 said:very cool agniusm. these are compatible with Lebowski controllers or just using a Arduino to aggregate the temps and cut off controllers if any go too hot.