Mobipus Controller Official
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Mobipus Controller Official
Hi everyone,
This is the Mobipus Controller official.
So here we are promoting you with our product line.
The Controllers will be sold via our retailers. Please PM if you were to look for your closest retailer.
Mobipus 72100 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 100A
Continous Phase Current : 250A
Rated Power : 7.2kw
Mobipus 72150 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 150A
Continous Phase Current : 250A
Rated Power : 10.8kw
Mobipus 72200 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 200A
Continous Phase Current : 350A
Rated Power : 14.4kw
Mobipus 72400 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 28.8kw
Mobipus 72600 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 600A
Continous Phase Current : 800A
Rated Power : 43.2kw
Mobipus 96400 Controller (6-7weeks Lead time)
Operating Votage Range : 60V-134V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 48kw
72100/72150/72200 Liquid Heatsink
72100/72150/72200 Air Heatsink
72600/72400/96400 Controller Liquid Heatsink
WIFI connector
Rs485 Cable
Purchase of controller will have initial setup service, we guarantee your build will run properly instead of leaving you confused with the product.
Our experienced engineer can also give you suggestion and help you with your build regarding battery selection, motor selection and more.
Features:
- Mobipus controller has over 300 programmable settings for you to toggle with, allow for a high degree of customization.
- The rating of our controller is all rated continuous, the peak current can easily go 100a-200a over the rated current. High continuous battery current allows you to have a consistent acceleration from the beginning to the end.
- Compact, Lighter weight, Reliable with high energy density.
- Hybrid Drive Mode allowing for both six-step, FOC or a mix of both.
- Field Weakening algorithm allowing you to go exceed the KV value of the motor.
- Hall sensor, PWM Encoder, Sin/Cos Encoder supported.
- Insane output, E-Bike race ready. With proper design, the controller has the potential of making 0-100km/h in 3.8 seconds with a top speed of over 160km/h on an E-scooter.
- You can design the linearity of throttle output to match your desired riding experience.
- Matches all PMSM motors.
- Regen Braking.
All of our controllers have a warranty of 1 year, with great customer service. Feel free to approach us.
Heres a sample build using the 72600.
https://www.youtube.com/watch?v=lD6UMxvWTLI
Help and advice or more information regarding the controller. you can contact our engineer through :
Danny@Mobipus.com
Cheers,
Mobipus.
This is the Mobipus Controller official.
So here we are promoting you with our product line.
The Controllers will be sold via our retailers. Please PM if you were to look for your closest retailer.
Mobipus 72100 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 100A
Continous Phase Current : 250A
Rated Power : 7.2kw
Mobipus 72150 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 150A
Continous Phase Current : 250A
Rated Power : 10.8kw
Mobipus 72200 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 200A
Continous Phase Current : 350A
Rated Power : 14.4kw
Mobipus 72400 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 28.8kw
Mobipus 72600 Controller
Operating Votage Range : 36V-90V
Continous Battery Current: 600A
Continous Phase Current : 800A
Rated Power : 43.2kw
Mobipus 96400 Controller (6-7weeks Lead time)
Operating Votage Range : 60V-134V
Continous Battery Current: 400A
Continous Phase Current : 600A
Rated Power : 48kw
72100/72150/72200 Liquid Heatsink
72100/72150/72200 Air Heatsink
72600/72400/96400 Controller Liquid Heatsink
WIFI connector
Rs485 Cable
Purchase of controller will have initial setup service, we guarantee your build will run properly instead of leaving you confused with the product.
Our experienced engineer can also give you suggestion and help you with your build regarding battery selection, motor selection and more.
Features:
- Mobipus controller has over 300 programmable settings for you to toggle with, allow for a high degree of customization.
- The rating of our controller is all rated continuous, the peak current can easily go 100a-200a over the rated current. High continuous battery current allows you to have a consistent acceleration from the beginning to the end.
- Compact, Lighter weight, Reliable with high energy density.
- Hybrid Drive Mode allowing for both six-step, FOC or a mix of both.
- Field Weakening algorithm allowing you to go exceed the KV value of the motor.
- Hall sensor, PWM Encoder, Sin/Cos Encoder supported.
- Insane output, E-Bike race ready. With proper design, the controller has the potential of making 0-100km/h in 3.8 seconds with a top speed of over 160km/h on an E-scooter.
- You can design the linearity of throttle output to match your desired riding experience.
- Matches all PMSM motors.
- Regen Braking.
All of our controllers have a warranty of 1 year, with great customer service. Feel free to approach us.
Heres a sample build using the 72600.
https://www.youtube.com/watch?v=lD6UMxvWTLI
Help and advice or more information regarding the controller. you can contact our engineer through :
Danny@Mobipus.com
Cheers,
Mobipus.
- Attachments
-
User Manual.pdf
- (778.53 KiB) Downloaded 305 times
Last edited by Mobipus Official on Nov 26 2018 12:19am, edited 2 times in total.
- liveforphysics 100 GW
- Posts: 14134
- Joined: Oct 29 2008 1:48am
- Location: Santa Cruz, CA, USA
Re: Mobipus Controller Official
Thank you for making great products!
Each carcinogen vapor exposure includes a dice roll for cancer.
Each mutagen vapor exposure includes a dice roll for reproductive genetic defects in your children.
Each engine start sprays them into a shared atmosphere which includes beings not offered an opportunity to consent accepting these cancer experiences and defective genetics life experiences.
Every post is a free gift to the collective of minds composing the living bleeding edge of LEV development on our spaceship.
Each mutagen vapor exposure includes a dice roll for reproductive genetic defects in your children.
Each engine start sprays them into a shared atmosphere which includes beings not offered an opportunity to consent accepting these cancer experiences and defective genetics life experiences.
Every post is a free gift to the collective of minds composing the living bleeding edge of LEV development on our spaceship.
Re: Mobipus Controller Official
Welcome to ES.
Good to see better access to these products.
I fixed one typo in the initial posting (1500A -> 150A on 72150).
Good to see better access to these products.
I fixed one typo in the initial posting (1500A -> 150A on 72150).
Re: Mobipus Controller Official
Is there somewhere a website, or is it just here available?
Re: Mobipus Controller Official
The manual says www.mobipus.com
- tahitiboob 1 W
- Posts: 63
- Joined: Dec 19 2017 6:02pm
Re: Mobipus Controller Official
in october 2017 i was very interessed about the controleur 72600 but the price was 1100 usd and the 72200 was 470 usd
but he dont have stock i buy sabvoton
but he dont have stock i buy sabvoton
-
- Posts: 11
- Joined: Apr 29 2010 10:11pm
Re: Mobipus Controller Official
I'm in the market for a new controller. Motor is QS 205 V3. I was running a kelly KLS72300S. I'm Looking for a 72++V 200A+ programmable Sinusoidal controller. What do you have?
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
Thank you for your support!

-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
The site was ages ago, it was used before we switch to OEM market. Now that we see more and more enthusiastic are into powerful ebike conversion, so here we are again.
The site will be updated again soon! Thanks for your support!
Cheers.

-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
I am sorry if you had an unpleasant time with our former service. Our company has improved in every aspect, your experience and satisfaction is very important.tahitiboob wrote: ↑Nov 03 2018 5:47pmin october 2017 i was very interessed about the controleur 72600 but the price was 1100 usd and the 72200 was 470 usd
but he dont have stock i buy sabvoton
If you are still interested or you just wanted to ask questions regarding electric conversion, you are welcome to Pm or email me.
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
We did have a website before the OEM market, but it havent been updated for quiet a long time. The product line is different now, if you wish to know more about our product or about electric project. Feel free to Pm or Email.

-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
The 72200 is a good option for your application.Speedtospare wrote: ↑Nov 04 2018 10:18amI'm in the market for a new controller. Motor is QS 205 V3. I was running a kelly KLS72300S. I'm Looking for a 72++V 200A+ programmable Sinusoidal controller. What do you have?
Our rating is different than most of other companies, 200A is rated phase current for Mobipus while 300A phase current is mainly used to name their controller by other brands.
PM or Email for more information.

Re: Mobipus Controller Official
sounds like:Mobipus Official wrote: ↑Nov 04 2018 10:01pmThe site was ages ago, it was used before we switch to OEM market. Now that we see more and more enthusiastic are into powerful ebike conversion, so here we are again.
The site will be updated again soon! Thanks for your support!
Cheers.![]()
- selling to private ppl
- going oem....give now a f**k on private ppl
- going oem doesnt work
- switching back to try selling to private ppl.
Re: Mobipus Controller Official
A while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
Hey,macribs wrote: ↑Nov 06 2018 9:38amA while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.
Re: Mobipus Controller Official
I Danny,
So now we can buy individual units?
It seems that you also resolved the shipping issue.
If that's correct, then I should delete my group buy post.
Thanks,
Marc
So now we can buy individual units?
It seems that you also resolved the shipping issue.
If that's correct, then I should delete my group buy post.
Thanks,
Marc
''Power is not a means, it is an end.'' O'Brien, 1984
Re: Mobipus Controller Official
Great. Let us know when the website is updated. Or feel free to post information on all of your products here in this thread.Mobipus Official wrote: ↑Nov 06 2018 8:08pmHey,macribs wrote: ↑Nov 06 2018 9:38amA while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.
Yeah I know it was not the dlc-28, that motor was mentioned as a dlc-28 clone here on the forum. It was said that the clone was more efficient, had better power output and higher peak power. But full data of the motor was lacking back then. Do you have more information on that motor? Happy to see all available data, including weight and the measurements for the outer shell.
Re: Mobipus Controller Official
I’m getting lots of questions about this as several folks who know me know I was about to start selling again. Or at least I thought I was.
I partnered with Mobipus originally to get some motors and controllers and to convince them to let me sell to aftermarket. Then there was some private issues within the company. I’m sad I sold my 40kw motor on but that’s life. I wasn’t to know I wouldn’t get more.
We recently made a visit and renewed the relationship. I managed to preserve my old pricing.I undertook training and managed to get full software access. But I now have no idea how it will work again going forward. I’m reluctant to take any more orders from ES people until I know what the plan is in case I get stuck with stock.
Thanks to those who have sent me a pm to ask what is going on. I don’t know.
Sam.
I partnered with Mobipus originally to get some motors and controllers and to convince them to let me sell to aftermarket. Then there was some private issues within the company. I’m sad I sold my 40kw motor on but that’s life. I wasn’t to know I wouldn’t get more.
We recently made a visit and renewed the relationship. I managed to preserve my old pricing.I undertook training and managed to get full software access. But I now have no idea how it will work again going forward. I’m reluctant to take any more orders from ES people until I know what the plan is in case I get stuck with stock.
Thanks to those who have sent me a pm to ask what is going on. I don’t know.
Sam.
http://ballaratebikes.com/



"Knowledge is knowing that a tomato is a fruit. Wisdom is knowing that a 165mm rear shock can't deliver 220mm of rear swingarm travel." - Oprah Winfrey.



"Knowledge is knowing that a tomato is a fruit. Wisdom is knowing that a 165mm rear shock can't deliver 220mm of rear swingarm travel." - Oprah Winfrey.
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
Hi Sam, I apologize for the trouble we caused you before, I will work closely with you and provide the best service I could.Samd wrote: ↑Nov 07 2018 6:09amI’m getting lots of questions about this as several folks who know me know I was about to start selling again. Or at least I thought I was.
I partnered with Mobipus originally to get some motors and controllers and to convince them to let me sell to aftermarket. Then there was some private issues within the company. I’m sad I sold my 40kw motor on but that’s life. I wasn’t to know I wouldn’t get more.
We recently made a visit and renewed the relationship. I managed to preserve my old pricing.I undertook training and managed to get full software access. But I now have no idea how it will work again going forward. I’m reluctant to take any more orders from ES people until I know what the plan is in case I get stuck with stock.
Thanks to those who have sent me a pm to ask what is going on. I don’t know.
Sam.
Thank you for staying with us.
Cheers.
Danny.
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
The motor for the supermoto was special made for our client, we couldn't leak their specs to the market.macribs wrote: ↑Nov 07 2018 5:23amGreat. Let us know when the website is updated. Or feel free to post information on all of your products here in this thread.Mobipus Official wrote: ↑Nov 06 2018 8:08pmHey,macribs wrote: ↑Nov 06 2018 9:38amA while back, guess spring of 2017 there was talk about mobipus also had a dlc-28 clone motor. I believe that motor is what is used in the 50KW electric supermoto build but I am not sure. Will that dlc-28 clone motor also be available to ES members? It seems like a perfect match for the 72600 controller....
Thanks for the attention.
First of all we can sell Motor and controllers in combo as well. Not only Motors, we can also recommend you with other components like battery, Charger, BMS and etc.
Secondly the Supermoto did not use dlc-28, it was powered by a custome made 40kw motor.
Yeah I know it was not the dlc-28, that motor was mentioned as a dlc-28 clone here on the forum. It was said that the clone was more efficient, had better power output and higher peak power. But full data of the motor was lacking back then. Do you have more information on that motor? Happy to see all available data, including weight and the measurements for the outer shell.
However, I will post more updates on our controller and builds to demonstrate the performance of it.
I could post some samples of mobipus with motors that individuals can purchase on the market eg.QS, Nine-Continental, Golden, ME and etc. leave a comment for what you wish to know.
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
As the official, we encourage those who wish to buy our product to seek for local retailer, not only they could provide faster and better service, but also they know the demand and need for individual user better than us.
Re: Mobipus Controller Official
I would like to see how the 72400 would works with my QS205 3.5T motor in a 17” rim. I’d probably never go over 250 battery amps but sometimes want more than the MaxE puts out now.
Tom
Tom
I'm married so you know I'm no stranger to pain!
-
- Posts: 13
- Joined: Nov 02 2018 10:31pm
Re: Mobipus Controller Official
May I ask whats the rated RPM for your motor under 72V?
For 3kw motors we recommend you to use 72200. The motor temperature will easily exceed 100 degrees if you use 72400.