APL
100 kW
- Joined
- Aug 6, 2018
- Messages
- 1,113
Yea, the little 600 sq. ft. shop is getting full these days, I have to walk sideways most of the time. The only tools I'm
missing now are a Tig welder, and a metal band saw.
Thanks for the link's guys, You Tube is such a savior. The most helpful one so far has been the HSS tool bit sharpening
vid. It show's exactly whats going on with the business end, and how it needs to be used. I like the idea of grinding my own.
https://www.youtube.com/watch?v=__A2xtLF0AU&t=1539s
Of course they're all helpful, and I'll be watching a lot of them for a while..
Right now I'm trying to get the lathe mounted up on the bench, and running again. After three days of moving a 300 lb+
machine around, plus a 100 lb+ motor assembly, I'm about as sore as I've ever been.
missing now are a Tig welder, and a metal band saw.
Thanks for the link's guys, You Tube is such a savior. The most helpful one so far has been the HSS tool bit sharpening
vid. It show's exactly whats going on with the business end, and how it needs to be used. I like the idea of grinding my own.
https://www.youtube.com/watch?v=__A2xtLF0AU&t=1539s
Of course they're all helpful, and I'll be watching a lot of them for a while..
Right now I'm trying to get the lathe mounted up on the bench, and running again. After three days of moving a 300 lb+
machine around, plus a 100 lb+ motor assembly, I'm about as sore as I've ever been.