Bought this one, sounds perfect, up to 220V DC 100A!
https://www.ebay.com/itm/SSR-100A-D...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Connected a 98V battery to a 50A resistor dummy load, connected a 12v input to the relay and within about 5 seconds I started hearing hissing and popping sound from the inside of the relay and it died and staid closed.
One thing I don't understand, the relay is just an on off switch, two positive and negative for the 12v input and two terminals that are either opened or closed.
I connected the two high current terminals to the + wire to open or close the circuit but looking at the little diagram on the relay it shows that one is + and one is - while it doesn't make sense to have a positive and negative as it is just opening and closing the connection of a single wire.
Am I missing something?
https://www.ebay.com/itm/SSR-100A-D...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Connected a 98V battery to a 50A resistor dummy load, connected a 12v input to the relay and within about 5 seconds I started hearing hissing and popping sound from the inside of the relay and it died and staid closed.
One thing I don't understand, the relay is just an on off switch, two positive and negative for the 12v input and two terminals that are either opened or closed.
I connected the two high current terminals to the + wire to open or close the circuit but looking at the little diagram on the relay it shows that one is + and one is - while it doesn't make sense to have a positive and negative as it is just opening and closing the connection of a single wire.
Am I missing something?