Grin Satiator
- Thread starter raylo32
- Start date
skeetab5780
1 MW
Awesome! Didn't know you could do that
raylo32
100 kW
Yes, for once I took a look through a manual... and found that option. 
markz
100 TW
Now you have to flip the label around on the front panel.
raylo32
100 kW
Nah, I just stand on my head.
markz said:
markz
100 TW
Its the finer details of a product that give you a hint as to the quality of the product, and the Grin Satiator would be an amazing charger to have.
skeetab5780
1 MW
Whatever you do, do not run it over with a fork truck!
raylo32
100 kW
Ouch! I am thinking there are easier ways to open it up to see what’s inside.
skeetab5780 said:Whatever you do, do not run it over with a fork truck!
raylo32 said:
That will be covered by warranty, right?
markz
100 TW
:lol: :lol: :lol: :lol:
Right :wink:
Right :wink:
fechter said:
As heavy as forklifts are, that's not as bad as I would've expected, given other things I've seen runover.
Does it still turn on?
BTW, if you don't want to fix it, I'll buy the screen and it's cable, if those are uncrushed (and cheap). I could also use the onboard output connector and mounting hardware.
Something is wrong with the cable to the screen on mine; I had to open it up to fix the output cable connector, whose ground "plate" had come off the screwdown point inside, causing repeated power faults. But after reassembly the screen didnt' come on; eventually I found the cable sometiems lets the screen turn on if I touch it just right, at the fold. :/
(could probably fix it with conductive paint, but I'd have to order that).
Thankfully I don't presently need to use more than the default profile...but when I do, it's gonna be harder to do without the screen. (and I can't see any of the stats, or if there were errors; I presently know it's charging when I hear the relay click on, but have to "assume" it finished correctly).
Does it still turn on?
BTW, if you don't want to fix it, I'll buy the screen and it's cable, if those are uncrushed (and cheap). I could also use the onboard output connector and mounting hardware.
Something is wrong with the cable to the screen on mine; I had to open it up to fix the output cable connector, whose ground "plate" had come off the screwdown point inside, causing repeated power faults. But after reassembly the screen didnt' come on; eventually I found the cable sometiems lets the screen turn on if I touch it just right, at the fold. :/
(could probably fix it with conductive paint, but I'd have to order that).
Thankfully I don't presently need to use more than the default profile...but when I do, it's gonna be harder to do without the screen. (and I can't see any of the stats, or if there were errors; I presently know it's charging when I hear the relay click on, but have to "assume" it finished correctly).
skeetab5780
1 MW
Its crushed beyond repair for me. Screen damaged main transformers crushed multiple boards broken in a few spots. Ill post more pics if interested in the parts, i kept the battery cable output since i use it on my new one, it ran over only half of the charger. Made a really loud pop sound similar to a gunshot
markz
100 TW
It looks to me as though the forklift caught the corner of the unit. So everything else is usable for sure!
Be helpful to the community and sell it for parts!
Be helpful to the community and sell it for parts!
skeetab5780
1 MW
I looked at it again today its pretty bad ill post pics but its not worth trying to fix to me.
