how to control the speed of bldc hub motor from the arduino...?

how to control the speed of bldc hub motor from the arduino...?

abbas jamali said:

how to control the speed of bldc hub motor from the arduino...?

Click to expand...

Use a controller and then control the speed by sending singal to the throttle signal wire.
You will need an arduino with an analog output of 0-5v.

thank you sir,
send the circuit diagram and coding

and some fresh squeezed orange juice with my breakfast, chop chop

abbas jamali said:

thank you sir,
send the circuit diagram and coding

Click to expand...

abbas jamali , I noticed that you've been attempting to get help by inserting questions into existing threads that sometimes don't pertain to the subject of those threads, with very little context. You have to provide useful information in order to receive useful advice. The best way to do that is to start a new thread with a subject specific to what you want advice on. This guide should help: https://endless-sphere.com/forums/viewtopic.php?f=3&t=66302

Re: cyclone controller help- 3 speed wiring
“how to control the speed of bldc hub motor from the arduino...?”

Re: Known to Work Brushless Motor/Controller Wiring Diagrams
“how to build speed controller for bldc hub motor 36 V 250 W with arduino nano ?”

Re: cyclone controller help- 3 speed wiring
“thank you sir,
send the circuit diagram and coding”

Re: How to select motor and gear ratio for mid-drive?
“hello sir,
which motor is best for electric bicycle can you suggest me name with company detail.”

Re: Rear Hub or Mid Drive for general XC riding?
“which motor is best for electric bicycles ..? geared hub motor or mid drive motor ..?”

Re: Battery Voltage and Motor choices
“i want to run a bicycle up to 36 km so which motor is suitable for this range”