sYnSBG said:
Offroader said:
You can get this new headset, assuming that is what you are referring to. They have all the right sized parts for a 1 1/8 straight steerer. If your DVO emerald is tapered then you will have to get something different.
https://lunacycle.com/cane-creek-forty-sur-ron-headset-bearing/
Yep, thanks the emrald is tapered, i found a Headset with the right diameters but i think there are no bearings inside, im new tho this so i have no glue xD
Gravity Unisex SX Pro Keine 55 Tapered Steuerrohr Mountain Bike Headset, Schwarz https://www.amazon.de/dp/B007WRYLJK/ref=cm_sw_r_cp_api_i_N9UrDbRZ9GRYS
You should really stick with cane creek or maybe hope. I had good luck with cane creek so I just use that headset. You can also call them on the phone for any questions and they have knowledgeable people who will answer all your questions.
I would recommend to just order the Luna Cycle headset as you won't beat that price as you need some custom parts. But that headset is only for a 1/8th straight steerer tubes like on the Killah Fork.
Since you need a tapered headset, I believe this one will work and I would recommend you buy this cane creek 40 tappered one after checking to make sure it will work. You will have to measure the inner diameter of your headtube and make sure the EC49 bottom cup is the proper size by calling cane creek. The Sur-Ron bottom head tube diameter should be about 49.61mm for this to work.
I actually think this headset will work with tapered or straight, you would just need to purchase the correct crown race to put on your fork.
https://www.amazon.com/Cane-Creek-40-Tapered-Headset/dp/B009F9475Q/ref=sr_1_3?gclid=CjwKCAjw7anqBRALEiwAgvGgm-Q2WLG9bzHGXfI9ES-Xr5cuWVRq1X6giFi8g6Wf5m6ozw8zmt6pVhoC2o8QAvD_BwE&hvadid=233914990245&hvdev=c&hvlocphy=9004153&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=4430914708950046066&hvtargid=aud-647006051489%3Akwd-331505144551&hydadcr=2431_9914356&keywords=cane+creek+40+tapered+headset&qid=1565190594&s=gateway&sr=8-3