Diva said:Hi!
Would someone have the original .hex file for a KT LCD3?
As it looks easy to modify program the tsdz2 with this program, I'd like to have all the original functionalities of the LCD (odometer etc.)...
Thanks in advance!
danielson said:Thanks.
I set Street mode to 500w and Max speed of 45kph and l couldn't seem to tell the difference between E03 and E04 in level 1. Heat also seemed about the same getting to around 63°C on my 8km ride home from work using speed and turbo modes. I'm running a small stand alone temperature gauge with the probe inside the case between the motor and controller.
Does EMTB mode need to be disabled (E01 in level 3) for other modes to work correctly ?
This is a known issue with older versions of Marcoq's software. Marcoq had solved this with the latest version. 3.7- M.0.19Cdanielson said:Possibly dangerous in the wrong situation.
.......
Thoughts on what caused this ???
v. 19C is the latest.danielson said:I'm using the V19 and 3.7. ........
The github version of stancecoke is indeed the 19C version too. Inside the files, the date is: 31/7/2019danielson said:Pretty sure l used the firmware from the github that stancoke had a link to page 14 l think. I'm away for a few days so will check when l return and update of required.
danielson said:I'm using the V19 and 3.7. I tried to duplicate it this morning with no success. The only other thing I recall doing was toggling the light switch on and then off in turbo mode prior to this happening. It was not a bad situation for me but if the battery did not have a switch within easy reach I would not have known what to do.
Thank you for this contribution. Looking forward to it.Ackmaniac said:Just forked the repository and added my changes. ..........
Elinx said:Thank you for this contribution. Looking forward to it.Ackmaniac said:Just forked the repository and added my changes. ..........
I presume it must be flashed with STM or is it possible to use Marcoq's java configurator too?
Atrihalov said:Sorry, please link.
Ackmaniac said:Also added a pull request to stancokes repository
Elinx said:Thank you for this contribution. Looking forward to it.Ackmaniac said:Just forked the repository and added my changes. ..........
I presume it must be flashed with STM or is it possible to use Marcoq's java configurator too?
stancecoke said:Atrihalov said:Sorry, please link.
see here:
https://github.com/AckmaniacSoftware/TSDZ2-Smart-EBike-compatible-with-original-VlCD6-display
Ackmaniac said:Also added a pull request to stancokes repository
Sorry, but I don't want to do any work on this project, please contact marcoq to update his repo directly.
regards
stancecoke
chri27.5 said:Intanto ringrazio Achmaniac per il suo contributo,......
You can download the file here.chri27.5 said:google>>
Meanwhile, I thank Achmaniac for his contribution,
I would be interested in testing your changes.
Where can I download the file?
Is it possible to use the Java configurator of marcop with your modifications?
Could you explain how to update?
thanks a lot
chri27.5 said:....
è sufficiente aprire il configuratore ...
Flashing is exactly the same as you must do with the original one of Marcoqchri27.5 said:google>>.....
is it enough to open the configurator and to flex?
Is it enough to open the configurator and program?