Hi power inverter for Nissan leaf motor. Dyno's 302.3hp p15

Electric Motors and Controllers
User avatar
Arlo1   100 GW

100 GW
Posts: 8370
Joined: Apr 26 2009 10:36pm
Location: Nanaimo
Contact:

Re: Hi power inverter for Nissan leaf motor. Dyno's 302.3hp p15

Post by Arlo1 » Sep 02 2019 4:03pm

coleasterling wrote:
Sep 02 2019 9:45am
If you found another good deal on 15's, there are some really, really good 245-15's these days, though they are mostly meant as AX and road race tires, not drag. Still, pretty sticky.
For now I needed a rolling chassis.

These seem usable for a while.

I have a lot of other work to focus on.

I will come back to this in the spring or when the rest of the car is done and I have lots of money or when I have traction problems lol.
Does your project need a high performance motor drive, battery charger or other power electronics developed? Let's talk!
www.powerdesigns.ca
Leaf motor controller build. http://endless-sphere.com/forums/viewto ... 27#p963227
YSR build http://www.youtube.com/watch?v=BRo8r5g4NBg
Never above 4.2v never below 2.7v EVER!!!
Support me on Patreon. https://www.patreon.com/user/posts?u=6842045
http://www.undergroundelectrics.ca/

FlatBlack   1 µW

1 µW
Posts: 4
Joined: Nov 05 2019 2:30pm
Location: Central Texas

Re: Hi power inverter for Nissan leaf motor. Dyno's 302.3hp p15

Post by FlatBlack » Nov 05 2019 7:24pm

Arlo,

Awesome build, watched alot of your YouTube videos today. I had a question about your inverters and saw you prefer PMs on this forum, but I think I'm "too new" and it won't let me send PMs.

Love the CRX build!
Mat - LS1 240LSX, E36 M3 Sedan, Kawasaki Z125, Rocky Mountain Hammer with 48V/750W BBS02

User avatar
Arlo1   100 GW

100 GW
Posts: 8370
Joined: Apr 26 2009 10:36pm
Location: Nanaimo
Contact:

Re: Hi power inverter for Nissan leaf motor. Dyno's 302.3hp p15

Post by Arlo1 » Nov 08 2019 11:48am

FlatBlack wrote:
Nov 05 2019 7:24pm
Arlo,

Awesome build, watched alot of your YouTube videos today. I had a question about your inverters and saw you prefer PMs on this forum, but I think I'm "too new" and it won't let me send PMs.

Love the CRX build!
It will let you Send PM's But if its related to this EV build at all you should ask it here so others who have the same questions can see the answers before sending a PM. If its not feel free to send a PM.

-Arlin
Does your project need a high performance motor drive, battery charger or other power electronics developed? Let's talk!
www.powerdesigns.ca
Leaf motor controller build. http://endless-sphere.com/forums/viewto ... 27#p963227
YSR build http://www.youtube.com/watch?v=BRo8r5g4NBg
Never above 4.2v never below 2.7v EVER!!!
Support me on Patreon. https://www.patreon.com/user/posts?u=6842045
http://www.undergroundelectrics.ca/

Post Reply