sn0wchyld said:
main thought re rewind itself helping is a higher turn count will lower the rpm (presuming testing done at same voltage) which will also lower no load loss, if only because of reduced rpm. dont want to go saying the nuk has made x improvement if the turncount is doubled form the last 'stock' test
Zero stock testing done...so who knows.
I certainly do NOT trust anything Revolt might say!
They don't exactly present you with honesty and real motor specs!
ALL of their motors I have, need improvements and have various issues with quality.
I did the work to fix the Revolt factory issues in this motor.
Let's look at what I get and ignore Revolts factory specs.
They are probably BS anyway!
My turn count is 6 turns, WYE and something like 80 kv...TBD. The factory count was 12 turns, 67kv and delta. I was never going to duplicate the 67kv wind on the motor from the factory. Never mind that I have more than 3X copper cross section than the factory wind. There's too many things that have changed IMHO to be able to do a comparison with the factory wind.
IF you guys have real stuff I can do or test...post away!
I am not all knowing. I do NOT know everything there is to know.
I am open to doing all sorts of stuff to measure how good my RV-160-SH is doing.
There is one limiting factor. I did this rewind for a friend in San Francisco. He's eagerly awaiting the motor and controller.
He knows the motor is done and that I need to do some minor setting changes in the controller before sending all of it to him.
I won't put him off for very long before sending off his stuff.
On a side note..John, Lars and Madden...I forgive you!
Lets work together and be productive and friendly.
There is no need for bashing people.
I'd be willing to remove you from my foes list.