9c hub in 26" rim super slow wind with temp sensor

Got something to sell? Have extra parts that need a good home? Have something that others would need to complete their kits? Post it up here and see if anyone else is searching for what you are selling.
Post Reply
User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » May 23 2020 11:10am

Hello

This has been sitting around too long so I should probably sell it. Its in awesome condition and has very little use on it. Its always been stored inside. Its the slowest winding that I know of at 12 turns. Its perfect for a cargo bike or a low speed cruiser. If you have a high voltage setup like 20s you can get respectable power from this with a very cheap low amp controller. I had it paired with a 9Fet Lyen at 30amps and it always stayed nice and cool.

9 continent motor. I believe its from around 2012-2014
12x6 winding. Super slow approx 4.5kv. In the 26" wheel it will do 25mph on 80v
insides have been sprayed with boeshield corrosion inhibitor
10k ntc temp sensor added to the windings for temp monitoring
Rim is a sun rhyno lite 26"
spokes are Sapim 13/14g single butted with Sapim polyax brass nipples from Holmes hobbies
I built the wheel myself and have put at most 500miles on it. I used a park tool tension gauge and the spokes were re-tensioned after the first few rides so the wheel has been properly stressed and will need no attention unless you hit something. I'm a machinist and am super particular about things like this so lots of care was taken when building the wheel.

I'd like $180+shipping which would be about $30-40 within the US. With a used Maxxis hookworm 2.5" wide tire I'd like to get $205+shipping.

It's in Saint Louis Missouri.
9c front view.jpg
9c front view.jpg (179.98 KiB) Viewed 549 times
9c connector view.jpg
9c connector view.jpg (136.6 KiB) Viewed 549 times
9c rim.jpg
9c rim.jpg (164.03 KiB) Viewed 549 times
Last edited by DanGT86 on Sep 10 2020 10:34pm, edited 2 times in total.

unklegrumpknee   100 mW

100 mW
Posts: 43
Joined: Apr 01 2010 12:23pm
Location: Northeast of Pittsburgh, PA USA

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by unklegrumpknee » May 30 2020 8:43am

Is it front or rear?

User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » May 30 2020 9:01am

Rear.

Cant believe I forgot to say that in there. Sorry.

torker   1 MW

1 MW
Posts: 1624
Joined: Oct 16 2008 8:46pm
Location: Udall, Ks.

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by torker » May 30 2020 10:16am

I have 2 of these winds. Older ones. Love them . My 20 inch build runs 15 mph at 48 v. The 26 inches runs the same at 36v :bigthumb:
Dave When I die I want to slide in sideways yelling WooHoo what a ride !

Giant Rincon w rear 9C 6*10 36 v x 20 amps
Specialized FSR Comp 9C 6*10 48v x 30 amps

User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » May 30 2020 12:35pm

Its from the old days when controller choices were more limited and all the hubs had small phase wires. Over volting was the easiest way to get big power with little money. As long as you are not trying to go 35mph I still think this is the best way to have a powerful bike with a $40 controller smaller battery and small wires.

I just dont need it in my fleet and there are other odds and ends I'd like to buy.
Last edited by DanGT86 on Sep 10 2020 10:37pm, edited 1 time in total.

User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » Sep 09 2020 4:33pm

Price drop
$180 plus shipping
$205 plus shipping with tire

User avatar
Chrisheuer   100 µW

100 µW
Posts: 8
Joined: Aug 25 2020 9:03pm

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by Chrisheuer » Sep 15 2020 2:51am

Hi you’ve got my interest here in Columbia mo. The problem is I’m kInd of a newbie but have been getting up to speed on the forum and grin videos. I’ve got 2 potential builds I’m thinking this might work for one is a front load trike the other is a lugged Nashbar 80’s mt bike. The situation is I’m a big guy 6’3” 290 and older 65 with a lot of bike riding experience. I’ve got a fair amount of bike mechanic skill. What caught my attention is the slow and the powerful. The Nashbar bike I’m looking to just cruise the Columbia rural roads and bike trails. I would need help picking a controller ,charger etc do you think this motor could work for my situation??

User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » Sep 15 2020 12:10pm

Possibly a good fit depending on how fast you want to go. Being a direct drive slow motor it will run with pretty much any controller on the market. With the more common 52v battery packs available right off the shelf you'd be looking at a top speed of about 15-18mph. If you run a higher voltage pack like 75v you can get into the 25mph range which seems much more common for ebikes. Cruising at 15 on flat ground would feel a bit slow in my opinion. Being new at ebikes I cant really recommend you jump right into custom batteries but I don't know your technical background.

If you matched this to a cheap $50-100 9Fet controller using a 20s pack and a CA3 to monitor temps you could get short peaks of around 2500-3000watts and have an efficient setup for 20ish mph cruising. To me that sounds like the perfect bike for a heavier rider or a cargo bike.

User avatar
Chrisheuer   100 µW

100 µW
Posts: 8
Joined: Aug 25 2020 9:03pm

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by Chrisheuer » Sep 15 2020 9:39pm

So 20s pack refers to a higher volt battery like 72 volt. Is that what you ran it with.


Sent from my iPhone using Tapatalk

User avatar
DanGT86   10 kW

10 kW
Posts: 868
Joined: Sep 06 2012 9:18pm
Location: Saint Louis MO

Re: 9c hub in 26" rim super slow wind with temp sensor

Post by DanGT86 » Sep 15 2020 10:27pm

Yes. By 20s I mean 20 cells in series. Since almost everyone is using li-ion cells that are fully charged at 4.2v each then 20s is 84v full and about 74v avg.

Thats what I was using this motor with. When ebiking I prefer to cruise at around 20-25mph. Any slower than that and I'll just take a non electric bike. For me its more like light motorcycling.

Post Reply