Suzuki GSX-R e899 K2

Cabling is near to finish.
Starting now with parameterisation ...
 

Attachments

  • 01.jpg
    01.jpg
    36.2 KB · Views: 2,474
So it’s alive ...
[youtube]_px04JXn2i8[/youtube]
 
Thanks Frank,
yes I was so happy to get it working!
In meantime I also did now the atomatic resolver tuning and the offset went from 0 to -127
So next steps will be to build the battery boxes and some minor stuff.
 
Met the Taycan 4S.
An absolutely fantastic car in performance and cornering.
 

Attachments

  • 3AB82ADA-7FB9-4E41-A08F-6D8E2FE38217.jpeg
    3AB82ADA-7FB9-4E41-A08F-6D8E2FE38217.jpeg
    89.3 KB · Views: 2,306
Made now the first ride ... only at 30A phase current but that was enough for cruising at 125VDC.
I calculated 60 kph at no load and reached 40,9 kph at the end.
 
Thanks,
Well the motor is from Phi Power AG. It’s a PhE381 with 200kW peak power for 20 seconds, 6000 rpm and 640Nm of torque.
The controller is from Scott Drive. Model SD300. Operating with max of 800VDC and forwarding up to 600ARMS phase current to the motor, so the type of model is listed with 400kVA and already tested with 340kW output power in combination with a Remy HV250 on a test bench by manufacturer.
I will start slowly with the power by increasing current and voltage step by step.
 
Check out the video clip:
[youtube] https://www.youtube.com/watch?v=61hLdsgmJf4&feature=share[/youtube]
 

Attachments

  • 1580654E-B790-4BE8-B28D-E6322B9E6512.jpeg
    1580654E-B790-4BE8-B28D-E6322B9E6512.jpeg
    125.5 KB · Views: 2,130
  • 00DFED3D-2A0F-4DBB-9FDE-556E8D9F617E.jpeg
    00DFED3D-2A0F-4DBB-9FDE-556E8D9F617E.jpeg
    129.5 KB · Views: 2,129
  • 9430E07E-5324-4FE5-8DC1-3511D63DB061.jpeg
    9430E07E-5324-4FE5-8DC1-3511D63DB061.jpeg
    126.3 KB · Views: 2,128
A long time you don’t hear something about my actually status.
There are still some tiny open points to manage.
E. g. I got now the right controller software to start with higher current runs and I successfully installed it

[youtube]4EdcPmUUKnE[/youtube]


But before I start with this tests I will rebuild the bike ….
 
[youtube]2CeyT6Bii5Q[/youtube]
 
Totally dissembled!
 

Attachments

  • 3E6B677F-9EB6-4F43-AD76-25C66EC2BEDF.jpeg
    3E6B677F-9EB6-4F43-AD76-25C66EC2BEDF.jpeg
    131.3 KB · Views: 1,619
Rust at the Steel adapter plates and the frame need some welding and color …
 
Next year, why?
 
Now the rest is welded and can be forward to the painter by next week …
 

Attachments

  • 1FE855D5-B98D-4858-8B9D-BA85CA6D122E.jpeg
    1FE855D5-B98D-4858-8B9D-BA85CA6D122E.jpeg
    262.7 KB · Views: 1,539
  • A6E9BD42-5E16-461D-BE44-AEB18EEB8719.jpeg
    A6E9BD42-5E16-461D-BE44-AEB18EEB8719.jpeg
    353.9 KB · Views: 1,539
  • 237F254F-5673-497C-86B0-BD28F2537F13.jpeg
    237F254F-5673-497C-86B0-BD28F2537F13.jpeg
    250.9 KB · Views: 1,539
Got already back the battery boxes …
 

Attachments

  • F9588D00-9D30-44FB-8657-F8DDD0FF92AE.jpeg
    F9588D00-9D30-44FB-8657-F8DDD0FF92AE.jpeg
    125.9 KB · Views: 1,501
The motor will also be colored a little bit by myself :lol:
 

Attachments

  • 2A10D216-237E-4261-A8B5-4F29C8857E4D.jpeg
    2A10D216-237E-4261-A8B5-4F29C8857E4D.jpeg
    314.3 KB · Views: 1,440
Finished 8)
 

Attachments

  • 82C3558F-AAD2-4EC6-A68A-49D6AA021F4A.jpeg
    82C3558F-AAD2-4EC6-A68A-49D6AA021F4A.jpeg
    510.7 KB · Views: 1,422
  • DFD797F5-7F24-44F4-A850-3E129D9C16EF.jpeg
    DFD797F5-7F24-44F4-A850-3E129D9C16EF.jpeg
    491.5 KB · Views: 1,422
Got the first parts back from painter ..
 

Attachments

  • 60CA9A60-3EC3-4BFA-8E71-BB90698CD9B1.jpeg
    60CA9A60-3EC3-4BFA-8E71-BB90698CD9B1.jpeg
    42.4 KB · Views: 1,345
Tail is near to ready …
 

Attachments

  • 0FC6E397-AECE-46A9-807D-27489CF035AB.jpeg
    0FC6E397-AECE-46A9-807D-27489CF035AB.jpeg
    124.4 KB · Views: 1,320
  • E69906E1-089D-4D1B-97DD-385B8B6B77D5.jpeg
    E69906E1-089D-4D1B-97DD-385B8B6B77D5.jpeg
    445.3 KB · Views: 1,320
Remove engine = 20 minutes
Install engine = 150 minutes

:lol:
 

Attachments

  • 25C941AE-05E9-4A71-8378-7500B308E718.jpeg
    25C941AE-05E9-4A71-8378-7500B308E718.jpeg
    58.4 KB · Views: 1,287
  • 1DDDB4DE-5857-4111-844E-5A20B8A7488C.jpeg
    1DDDB4DE-5857-4111-844E-5A20B8A7488C.jpeg
    63.8 KB · Views: 1,287
Excited to see this beat rip my friend! :bolt: 8) :thumb:
 
Back
Top