bike4life
10 W
- Joined
- Apr 10, 2020
- Messages
- 82
So currently me ebike has 2 of these a123 lifepo4 packs... See one on each side of the bike...
I basically take each battery out of the bike and chargew them individually... They pop off easily...
Currently, I've been hookiing the balance leads to each of the 12 terminals basically with alligator clips. On my balance leads, ive crimbed on alligator clips to go to the terminals and to run to the BMS... In the second image, ive removed those wires, but it shows the terminals...
Can't I just alligator clip my batteries in parallel and charge them both at the same time... right?
Am i missing something here... I dont think so... I would only need to hook my bms balance leads to one of the batteries then, correct?
Thanks!!!
I basically take each battery out of the bike and chargew them individually... They pop off easily...
Currently, I've been hookiing the balance leads to each of the 12 terminals basically with alligator clips. On my balance leads, ive crimbed on alligator clips to go to the terminals and to run to the BMS... In the second image, ive removed those wires, but it shows the terminals...
Can't I just alligator clip my batteries in parallel and charge them both at the same time... right?
Am i missing something here... I dont think so... I would only need to hook my bms balance leads to one of the batteries then, correct?
Thanks!!!