QS build partout

Got something to sell? Have extra parts that need a good home? Have something that others would need to complete their kits? Post it up here and see if anyone else is searching for what you are selling.
Post Reply
SaabGuy   10 mW

10 mW
Posts: 27
Joined: May 05 2018 6:33pm

QS build partout

Post by SaabGuy » Jan 09 2021 11:47am

All this stuff has approx 40 miles on it (a few charge cycles). Like new. Located in the USA.

-($500+ship) QS 205 V3 50H 8.33kv with statorade and hub sinks.
-($150+ ship) sabvoton 72150
-($40ea +ship) multistar lipo 4s 10Ah (8qty)
-($80 +ship) shimano hydraulic brakes
Attachments
IMG_20201230_170123.jpg
IMG_20201230_170123.jpg (4.25 MiB) Viewed 490 times
IMG_20210101_200414.jpg
IMG_20210101_200414.jpg (3.98 MiB) Viewed 490 times
IMG_20201230_170117.jpg
IMG_20201230_170117.jpg (4.59 MiB) Viewed 490 times
IMG_20201230_170140.jpg
IMG_20201230_170140.jpg (3.96 MiB) Viewed 490 times
received_788135385290092.jpeg
received_788135385290092.jpeg (414.87 KiB) Viewed 490 times

ropower86   10 W

10 W
Posts: 70
Joined: Dec 05 2016 7:50pm

Re: QS build partout

Post by ropower86 » Jan 12 2021 7:03pm

Which part of the US are you located in? I am very interested in buying a 4s battery

SaabGuy   10 mW

10 mW
Posts: 27
Joined: May 05 2018 6:33pm

Re: QS build partout

Post by SaabGuy » Jan 12 2021 7:14pm

Zip 57078

ropower86   10 W

10 W
Posts: 70
Joined: Dec 05 2016 7:50pm

Re: QS build partout

Post by ropower86 » Jan 12 2021 7:32pm

How much for the shipping to 89031? What service are you going to use? Also, why did you gave up on this nice project?

ropower86   10 W

10 W
Posts: 70
Joined: Dec 05 2016 7:50pm

Re: QS build partout

Post by ropower86 » Jan 12 2021 7:34pm

Just want to buy (1 )4s battery. Maybe later this month I might be ending up buying the hub wheel.

SaabGuy   10 mW

10 mW
Posts: 27
Joined: May 05 2018 6:33pm

Re: QS build partout

Post by SaabGuy » Jan 13 2021 9:08am

Shipping would be $12 for one battery

I dont like the bicycle frame. I want to get a small dual sport bike and build one of those. I also dont like how easy these are to steal... Makes me nervous actually using it.

Blacksword   10 mW

10 mW
Posts: 20
Joined: Jul 21 2020 9:47am

Re: QS build partout

Post by Blacksword » Jan 13 2021 7:14pm

Is that mounted in a 26" fat bike tire what is the dropout width.

Asking as I have an old Ice Cream Truck fat bike with 190mm rear dropout I want to put a QS 205 into.

SaabGuy   10 mW

10 mW
Posts: 27
Joined: May 05 2018 6:33pm

Re: QS build partout

Post by SaabGuy » Jan 13 2021 7:48pm

Yes. 26x4 80mm rim.

It's meant for 150mm dropouts, but my machined torque plates are 10mm wide to space it out for my 170mm frame. You could probably make it work, but you'd have to forgo the axle nut, but that'd be fine with these clamps though I think.
Ropower86,
Idk if I want to sell just one battery. I'll let you know

ropower86   10 W

10 W
Posts: 70
Joined: Dec 05 2016 7:50pm

Re: QS build partout

Post by ropower86 » Jan 14 2021 11:27pm

SaabGuy wrote:
Jan 13 2021 7:48pm
Yes. 26x4 80mm rim.

It's meant for 150mm dropouts, but my machined torque plates are 10mm wide to space it out for my 170mm frame. You could probably make it work, but you'd have to forgo the axle nut, but that'd be fine with these clamps though I think.
Ropower86,
Idk if I want to sell just one battery. I'll let you know
I Will buy 2 battery is that fine with you?

User avatar
e-biker   100 W

100 W
Posts: 275
Joined: Nov 01 2011 7:24pm
Location: RIVERDALE GA

Re: QS build partout

Post by e-biker » Jan 15 2021 5:48pm

i will take all the 4s batteries
24 s 4P, lyen 18 fet,QS 205V3, double crown monster ft forks large steel currie mongoose 24 450 (- the currie ) frame dual hyd disc daily commuter.
24s 20" M/P 2 casted wheelie machine, everybody should have one!!

Post Reply