Hi ive got exactly the same problem , controller powers up red light and green light when either brake is applied ive tested the power to the throttle 4.7v to 1 side of the hall sensor 0.08 to the other , but on twisting the throttle nothing happens, I have the Bluetooth adaptor and USB, I can get them both to work but in the parameters throttle voltage shows 0.02v it doesn't increase whatever I dopdx wrote: ↑Dec 09 2017 10:52pmHey everyone,
I'm trying setup my QS-205 build with the Sabvoton controller. I've pretty much followed the steps on this guide, but it looks like I'm unable to connect the computer to the controller properly. My goal is to run the hall test to make sure the motor and the controller are functioning properly (these are all new parts bought from ERT a while ago).
I've made a video so that it is easier to see the problem. As this is my first hub-motor build, I'd love any insight from the more experienced/knowledgeable audience.
My controller doesn't have an orange elock wire, and I have no key switch wired in.
Did you ever get yours working, or is it still gathering dust?
Any help please its driving me bonkers.
Ive a QS v3 5000w hub
72v 32 ah battery
Sabvoton 72100 controller