Vesc hgltech 75v 200amps

Yer bike busted? tell us all about it here.
Post Reply
tailele   1 µW

1 µW
Posts: 1
Joined: Mar 19 2021 11:54pm

Vesc hgltech 75v 200amps

Post by tailele » Mar 20 2021 12:00am

Good morning bus, i m news, and i m trying ti build a e-bike with this vesc... Now i connect motors, One rear and One front correctly...but i miss to connect the throttle and the brake. Really the throttle works, but the brake not verry well.
I connect :
Throttle , Red to 5 v , black to gnd and signal to ADC
Brake , One cable on ADC 2 and the second cable to 3.3v..


I m wrong ? I don t find a wrong diagram so for me It Is difficult. Thanks a lot

Hayds13   100 mW

100 mW
Posts: 35
Joined: Dec 25 2014 12:48pm
Location: Sydney, Australia
Contact:

Re: Vesc hgltech 75v 200amps

Post by Hayds13 » Mar 20 2021 6:54am

This might help....Ebike Throttle and Brake Connect to VESC and Parameters Setting Tutorial | Flipsky

https://www.youtube.com/watch?v=44qoVyJf-uk

district9prawn   1 kW

1 kW
Posts: 326
Joined: Jul 20 2013 10:46pm
Location: Sydney

Re: Vesc hgltech 75v 200amps

Post by district9prawn » Mar 20 2021 7:08am

You should connect the throttle 5v to the vesc 3.3V supply. This way you will keep the signal value below the maximum of 3.3V.
Neu 8057 6kW left hand drive hardtail with 18 fet Vesc: viewtopic.php?f=6&t=96754

Post Reply