turnigy/zippy battery balance board?!
- Thread starter neptronix
- Start date
MrKang
100 W
Nice !!!! Mesa liky!! 
ps this is the board....PRE ORDER NOW !!
ps this is the board....PRE ORDER NOW !!
Gregory
100 kW
yes nice find. That'll make some who are fence sitting switch to lipo.
Ricky_nz
10 kW
Might be a bit dangerous for new users to LIPO.
If batteries of different state of charge are connected in parallel there will be fireworks!
If batteries of different state of charge are connected in parallel there will be fireworks!
Ricky_nz said:
+1
MrKang
100 W
I hope HK will put a big notification on it Warning Lipo noobs.
otherwise it will indeed be some firworks....
But for us lipo geeks this will be a nice gadget-tool!
otherwise it will indeed be some firworks....
But for us lipo geeks this will be a nice gadget-tool!
dogman dan
1 PW
Just what I need. I like to remove em from the bike to charge. Got my stock alert turned on. Thanks! I'll have to mcguyver it to andersons though.
wineboyrider
1 MW
Found them on my own today and then on ES. I was looking for 6s female to female wires though so I can hook up Gary's LVC boards???? 
:| The balance wires are too short.
:| The balance wires are too short.el_walto
10 kW
Someone needs to design a BMS that looks similar to this.
snowranger
10 kW
Is this thing beefy enough to discharge through too?
el_walto
10 kW
snowranger said:
I wouldn't "Max current: 30A"
vanilla ice
1 MW
For me it is! Thanks for the heads up, what kind of connectors are those?
would be handy just to connect the ballance leads in parallel.. discharge direct from the pack main wires.
vanilla ice said:
They are hobbykings answer to Deans connectors. XT-60 they call them. I like them for up to 12g wire.
grindz145
1 MW
They probably aught to have some power resistors in there...
peterperkins
100 W
- Joined
- Jun 6, 2008
- Messages
- 196
What are the part numbers and specs for those yellow power connectors on the ends of the battery leads and on the pcb? Anyone?
MrKang
100 W
nicobie said:
Answer to Peter
http://www.hobbyking.com/hobbyking/...ct_Name=XT60_Connectors_Male/Female_(5_pairs)
docnjoj
1 GW
Those connectors look like a copy of the Astroflight "zero loss" connectors that Bob Boucher manufactures.
otherDoc
otherDoc
Similar threads
