moostrodamus
100 W
Howdy,
I found "instructable" on how to hook 2 motors up with a DPDT switch so you could run them either in series or parallel.
http://www.instructables.com/id/SIMPLE-ParallelSeries-Select-Switch/step2/Wiring-the-switch/
So I used that and came up with this to hook up two 36v batteries to a DPDT switch to run either in series or parallel.
My understanding is top position would be Parallel, middle position off (use for charging?) and bottom position series.
Should this work?
Can i assume i should buy a 30 amp switch as i am using a 30 amp controller?
Lurning is hard. Any comments/ corrections appreciated,
Moo
I found "instructable" on how to hook 2 motors up with a DPDT switch so you could run them either in series or parallel.
http://www.instructables.com/id/SIMPLE-ParallelSeries-Select-Switch/step2/Wiring-the-switch/
So I used that and came up with this to hook up two 36v batteries to a DPDT switch to run either in series or parallel.
My understanding is top position would be Parallel, middle position off (use for charging?) and bottom position series.
Should this work?
Can i assume i should buy a 30 amp switch as i am using a 30 amp controller?
Lurning is hard. Any comments/ corrections appreciated,
Moo