SKATEBOARD video & gps 23 mph

got to ride my board with 6s 5000 mah very fast lots of power up hills in central park like nothing
next week will try to get video and gps 8) :lol: :twisted: :mrgreen: :shock:
 
i cut of 8" inches of the board feels better turns much better
 

Attachments

  • photo 10.JPG
    photo 10.JPG
    52.8 KB · Views: 17,557
looking good!
Lets see some video footage when you get this thing finished.
 
EBJ said:
looking good!
Lets see some video footage when you get this thing finished.

will try to get some video sat going around central park and gps speed
 
nice grip tape pattern. I like how "hidden" the electronics are from above.
 
23 mph did not push full speed it fast very fast it will hit 27 mph if you are brave
 

Attachments

  • photo 1.PNG
    photo 1.PNG
    98.3 KB · Views: 17,731
  • photo 2.PNG
    photo 2.PNG
    40 KB · Views: 17,731
[youtube]DVgXRS4fpjI[/youtube]
 

Attachments

  • photo3.JPG
    photo3.JPG
    58.2 KB · Views: 17,773
eskateboard Cosmetics the board is running great fast 5000 mah battery getting 5 miles
 

Attachments

  • 1111.JPG
    1111.JPG
    116.9 KB · Views: 17,660
mods
 

Attachments

  • 2222222.JPG
    2222222.JPG
    57.6 KB · Views: 17,609
  • 33333333.JPG
    33333333.JPG
    59.7 KB · Views: 17,609
brothers board
 

Attachments

  • 1.JPG
    1.JPG
    19.2 KB · Views: 6,355
  • 2.JPG
    2.JPG
    20 KB · Views: 6,355
  • 3.JPG
    3.JPG
    17 KB · Views: 6,355
  • photo 4.JPG
    photo 4.JPG
    134.7 KB · Views: 6,355
Excellent work on your skateboard! I have an Exkate Raptor 4 and have been using 6S 5000mA batteries and a mamba monster ESC and it runs fine with the brushed motor and I have the same Turnigy out runner motor and have been thinking of putting this motor on but wasn't sure. Glad I found this site and your posts!

Is there regenerative braking -or braking capabilities with this motor?
Also can you takes some pictures of the gear on motor shaft? I want to know how you mounted it on the shaft.
I noticed that on your brother's motor the gear is on the other end can you take some close ups of that.

Awesome work!
 
This is sooo cool. I now have another toy that I need to make :)

Will you be able to supply any of those parts for those interested in making one?
 
EZRUN 150 amp car esc
It has proportional brake
I weigh 180 pounds it stops
With no problem
 
I am running on 6s 5000 mah battery
Going to try 7s 5000 mah battery
Should be very fast will post video and gps
 
drive
 

Attachments

  • photo 1.JPG
    photo 1.JPG
    49.9 KB · Views: 7,774
  • photo 2.JPG
    photo 2.JPG
    46.1 KB · Views: 7,774
  • photo 3.JPG
    photo 3.JPG
    38.7 KB · Views: 7,774
Hey Papo
thanks for posting the close up pictures. I see that you have a threaded shaft on the motor that holds the small gear. Can you give me the specks on the shaft and where did you get the shaft from? My motor came with a 10mm shaft and was wondering how easy to change the shaft on these motors? I see a cotter pin holding the shaft in place is this all I have to remove to change the shaft?
thanks!
 
Back
Top