moonshine
1 kW
Alright, so I've been actually working on this bike for the past year now...getting all the parts and stuff, but now that i have it running, GCinDC convinced me to start a build thread since I'm running into problems.
List of Materials:
03 Giant DH Comp
Lyen 18fet 4115 controller (with some extra work done) (BLOWN and getting repaired)
Lyen 12fet 4110 sensorless (backup, thanks GC)
30s2p (6-turnigy 6s 5ah 20C lipo and 4-zippys 6s 5ah 20C)
Icecube's lipo harness (75a andersons everywhere)
Falcon EV bag (until i get my enclosure done)
Kiwi's AWESOME DROPOUTS
16t freewheel
x5404 (hubzilla on the way...)
right now, the bike is running just fine, albeit a little weak with the sensorless, but i learned my lesson by dickin around with a shitty throttle, 30s2p, and the 5404 at 2am.
Problems encountered:
-messed up one of the phases on the 18fet controller. I was being stupid and went crazy with the settings.....
-definitely need some dishing with the 5404 in 135mm dropouts...There wasn't much i could do with the wheel that it was laced in. so far its ok...becasue i don't have the 2.70 knobbies on it, i have a high roller 2.35 borrowed from GC.
-I have no rear disc...since the 5404 is all weird when lined up in my dropouts...
-i think thats actually all i can remember for now.
I don't know how to get the pictures to show up on the post...so my bad...apparently they're too big as attachments...
List of Materials:
03 Giant DH Comp
Lyen 18fet 4115 controller (with some extra work done) (BLOWN and getting repaired)
Lyen 12fet 4110 sensorless (backup, thanks GC)
30s2p (6-turnigy 6s 5ah 20C lipo and 4-zippys 6s 5ah 20C)
Icecube's lipo harness (75a andersons everywhere)
Falcon EV bag (until i get my enclosure done)
Kiwi's AWESOME DROPOUTS
16t freewheel
x5404 (hubzilla on the way...)
right now, the bike is running just fine, albeit a little weak with the sensorless, but i learned my lesson by dickin around with a shitty throttle, 30s2p, and the 5404 at 2am.
Problems encountered:
-messed up one of the phases on the 18fet controller. I was being stupid and went crazy with the settings.....
-definitely need some dishing with the 5404 in 135mm dropouts...There wasn't much i could do with the wheel that it was laced in. so far its ok...becasue i don't have the 2.70 knobbies on it, i have a high roller 2.35 borrowed from GC.
-I have no rear disc...since the 5404 is all weird when lined up in my dropouts...
-i think thats actually all i can remember for now.
I don't know how to get the pictures to show up on the post...so my bad...apparently they're too big as attachments...