Cromotor v3 Spoke ordering specs!

Hey guys
Cant seem to find the information online and Jeremy hasnt gotten back to me yet so I figured I would ask - does anybody know the
-Hub Flange Diameter
-Hub Center to Flange Center
-Hub Spoke Hole Diameter

for the Cromotor V3? Looking to order some spokes and it looks like I need that information to get an accurate spoke length.

Thanks everyone!

Anyone??

i found some spec of the motor type in qulbix raptor with cromotor. or copy and paste https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=0CDQQFjAG&url=http%3A%2F%2Fwww.qulbix.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D84%253Aelectric-motor-compatibility%26catid%3D85%26Itemid%3D544&ei=sqfxU57FEdD4oATW34GQAg&usg=AFQjCNGAKCHOg9L84tro0XJn6QdiAOB7eQ&sig2=afUakFOWrIIzT7iOVSQwUQ&bvm=bv.73231344,d.cGU. one and theres pics of it i.my measurement of the diameter was 9 1/8 inch .then convert it to mm. i got a 170mm spoke length on my 26 inch rim. see if that works

Cromotors have 2 sets of spoke holes, ~3,1 mm and ~4,2 mm.
Here's a picture with dimensions for you.