Hi guys this is a sneak peek at my custom hubmotor project I have been working on for some time know. The motor screw onto any 8mm longboard axel! The urathan can be replaced and because of a lot of different design attempts we have found the best way to lock the urathan to the motor.
We are thinking of realeaseing the motors as open hardware or sell the motors for DIYers! We want to run a beta test soon to fix some more bugs and will allow some people to be apart of this.
We have also been working on CF stealth deck!
Please leave your feed back!
1000w so can be twin or single drive
Each motor weight is 1.35lb
Each motor has 2x ceramic bearings 1 on each side.
more discussion on the development of these motors are located here
In going 25km because of my knee but had a lot of throttle left!http://www.gofundme.com/Longboardhubmotor
this is a link for crowd funding for a mould to be made for the wheels! the mould will be owned by endless sphere members and not by my self.
if the funding gets more then needed it will be used to fund other things like esc and controller!