DaDo.Bzz

Guys, anybody has a 750W USA version of firmware file? CAN version. Hard to get.

Yes, this is v43.1 and looks like latest. I have v41.1 - but is good as you can set power levels. I guess v43.1 should support also.

And 41.1 has a big difference. You can set power levels over Besst Pro. Finally. Here is a simple flash device, for those who dont have...

Hello. Have managed a little breakthrough - removed power limitation at 30%, for those who dont own original CAN Bus Bafang battery. And...

Dado nice job. :thumb:

Interesting stuff, thats best solution for people who want to have legal/offroad modes in modern Bafang CAN based bikes. No downsides.

I added a throttle to my Priority Current, which uses a Truckrun motor (I think it's an M01, but they're all so similar it's hard to...

Hello guys. Got first return of K1 Flash (so return rate under 1% ). Customer had some kind of very old M600 firmware and was stating...

K1 Flash tested with first M560 - 500W. Works great. One observation: Not possible to set throttle speed limit. It is hardcoded (45...

With Flash it is only to set speed, circumference and wheel size over terminal. Rest over config file on included SD card. Commands...

What are the Terminal commands? So you can actually run terminal?

Interesting! I haven't seen a product like this yet, could be a huge deal for CANBUS Bafang systems. Don't have one myself but would...

Hello. Should not go 250W with all PAS levels with DPC245. Very strange. Unless your motor firmware is set so. DPC245 is same protocol...

Hello Jermaine. Yes, that would be possible as K1 Flash can upload also M620 firmware. Unfortunately I dont have any 52V firmware for...