MaximilianMM

Ok thank you all, I appreciate the advice. I have a second battery which I've moved from another bike and it's working. So I know it's...

Have you tried checking the voltage of the battery? There’s many reasons, but your BMS could be protecting you. It doesn’t hurt just to...

Hi there. My Unit Pack Power battery just conked out. It was working fine, and now it won't charge. If I plug it in I get a response...

Thanks very much. Any suggestion of how to address a controller restriction of the kind you describe?

No, I bought it separately. Which is why I can't figure why it seems to be slower despite increasing the speed limit to the maximum.

Thank you very much. I'll do that. Does anyone have any idea why I can't derestrict the full speed on my KTLCD5? I heard sometimes...

Thanks all. I've tried cleaning the connections with a bit of vinegar and with wd40. It's still not working. I've also bought a new...

If the throttle worked already, I'd spray both connectors with WD40, plug and unplug them several times, and spray them again and wipe...

Thanks all. Will try those things. Would getting a new throttle also work?!

Anyone? A bit stuck here

Update: I have identified the issue stopping the PAS working, it was a faulty brake sensor. So I just need to work out my the throttle...

Just for clarification, the LCD5 is a display, and it connects to the controller (for KT, the silver box). Did you replace the display...

There are LCD5 P and C settings that could inhibit throttle and PAS. If you can still read the P and C parameters on the old LCD5, copy...

Thank you all. I shouldn't have used the word controller. I didn't touch the controller, I just swapped the display. I'll try those...

I have been running a KT LCD5 controller on my 48v rear hub motor without problem. I replaced the KT LCD as the previous one's display...