Search results

Date Relevance Most replies

  1. P

    Votol EM-100 & EM-150 controllers

    That's great, do you know the password
  2. P

    Votol EM-100 & EM-150 controllers

    Your voltage is displayed as 47.5v? (I don't speak Chinese) but the soft undervoltage setting is 50v!?..... Maybe 45v would be better. But the motor only has 400w power. So you already have about 3200w.....?? With a 400w motor, really?
  3. P

    Votol Em200-2sp Throttle problems

    There are some videos on youtube, about the votol calibration mode
  4. P

    Votol Em200-2sp Throttle problems

    Remote klick, then take the slider...
  5. P

    Votol Em200-2sp Throttle problems

    For me, with German keyboard! Switch to English keyboard layout! Place the cursor behind the 0 in the error_count field, delete the 0! Hold down the Shift key! Press ^ twice! Now you can calibrate and use the remote control! Be careful!
  6. P

    Votol Em200-2sp Throttle problems

    Have you tried using the remote control in the debugging software instead of the throttle?
  7. P

    Votol EM-100 & EM-150 controllers

    I think it's more like 60 degrees. Or do you mean the hall shift angle in the votol debug software?
  8. P

    Votol EM-100 & EM-150 controllers

    Is the configuration the same? FW2.33? EM150 72490?
  9. P

    EM150SP & QS Mid Drive Motor Issue

    It limits engine RPM, is that what you want? Yes? , then it's good.
  10. P

    EM150SP & QS Mid Drive Motor Issue

    HDC, why? What is your engine speed? Max?
  11. P

    Votol EM-100 & EM-150 controllers

    5 pole pairs, hall shift angle = 60 (default) after self-learning = 53 (for me)
  12. P

    Votol EM-100 & EM-150 controllers

    Hi, Welche SW-Version? Welcher Controller? Welche Batterie (Spannung)
  13. P

    Votol EM-100 & EM-150 controllers

    Diese Einstellung funktioniert bei mir
  14. P

    Votol EM-100 & EM-150 controllers

    trial and error! Unfortunately, I don't know what the programmer wanted to do with it. For me, this power loss, at full power, was uphill. After on/off it went back to normal immediately. The values TC1, tc2, tc3 were all very high. I first halved TC1 and then halved it again. I don't know...
  15. P

    Votol EM-100 & EM-150 controllers

    Möglicherweise die Einstellung, Temperaturkoeffizient! Im Kalibrierungsmodus sichtbar...
  16. P

    Votol EM-100 & EM-150 controllers

    The votol neither switches on the light nor the brake light. This is usually done with a 12v voltage converter and the brake lever switches.
  17. P

    Votol EM-100 & EM-150 controllers

    Exakt! Und dafür gibt es in der votol-Software die Einstellung "hall shift". Dafür gibt es eine Selbstlernfunktion. http://www.siaecosys.com/upfile/202203/2022030461497777.pdf (english version: Exactly! And that's what the "hall shift" setting is for in the votol software. There is a...
  18. P

    Surron controller upgrade

    Ich habe Surron-Stecker zum Votol gemacht. Den Surron-Kabelbaum in Ruhe gelassen. Der Surron Controller ist so, zurück in 10 min.
  19. P

    Votol EM-100 & EM-150 controllers

    Der Original-Surron-Motor hat eine Hallsensorplatine. Da sind 3 Hallsensoren drauf. Sie sind um 120° voneinander beabstandet. Das einzige, was in der votol-Software angepasst werden muss, ist der Shift-Winkel! Hier sind 60°, ganz gut. Beim Selbstlernen bin ich bei 53°. Toleranz steckt also in...
  20. P

    Votol EM-100 & EM-150 controllers

    If your controller requires a Hall angle of 120°, your motor must also have it. This is not the Hall Shift setting.
  21. P

    Sur-Ron - New Mid drive Bike

    Ich habe einen älteren "x-Controller", für hohe Leistung muss das grüne Kabel geschlossen werden........ SD05PF060A20
  22. P

    Votol EM-100 & EM-150 controllers

    Too bad, it didn't work with another em 150 with firmware 2.32 either. But with 2.33, I would have hoped, that it would also work with em100. hmmm the chinese...
  23. P

    Votol EM-100 & EM-150 controllers

    http://www.siaecosys.com/upfile/202203/2022030461497777.pdf Works for me, with em 150 s (no - 2, the one with three plugs) just take a known port that already works (sport mode switch for me)
  24. P

    Votol EM-100 & EM-150 controllers

    Hi With firmware version 2.33, the Hall Shift angle can be determined with the self-learning function
  25. P

    Votol EM-100 & EM-150 controllers

    Are you looking for a solution to the "power reduction problem"? For me!! (FW2.33,em150,mittel motor, 5 polpaare ) the solution is: TC1=1000 All values ​​for "Temperature protection" are: 100,120,130,1000,9300,9428 I don't know what it does! But it works wonderfully... For me!
Back
Top