Search results

Date Relevance Most replies

  1. T

    Bafang G500A GVT HUB.

    Anybody ???????????? :unsure:
  2. T

    Bafang G500A GVT HUB.

    Thanks :rolleyes:
  3. T

    Shimano Alfine SG-S700 11 speed short ride and information

    Hi Guys, I looked at th 3X3 NINE hubs. Although they appear to be just the specailist job and Just what I would want. Paying nearly £1000 to fit my bike is alittle too steep for me. I originally wanted to fit a Shimano Hub like the nexus or Alfie to the wheel i had, and utilise the Di2 gear...
  4. T

    Shimano Alfine SG-S700 11 speed short ride and information

    I looked at the Kindernay Hub , but was concerned about buying one as they are now bankrupt.So getting spares and repairs may be an issue. Going to look a 3X3 Nine Hubs now , thanks on the info (y)
  5. T

    Shimano Alfine SG-S700 11 speed short ride and information

    yes DT swiss rim supplied with bike has a count of 28 spokes. the alfie hub has 32 or 36 , I know you can miss a few spokes out , but thats the first issue i encountered. The next is its DOL is 135mmm and i need 148mm ( i could use few spacers to Fill.) I would of rather buy the 32 or 36 spoke...
  6. T

    Shimano Alfine SG-S700 11 speed short ride and information

    I wanted to fit an Alfine 11 speed to my 2019 Merida E160. Did a bit of research on it , then found out they only come with a solid M10 thread shaft running through it , which rules it out for my bike , as mine is a 12x148mm boost shaft. gutted , the only other alternative is Enviolo unit ...
  7. T

    Cyclists Beware

    this isn't facebook !
  8. T

    Bafang G500A GVT HUB.

    Hi , I have searched on the internet to try and find a supplier of the new GVT G500A hub. Lots info to read , but info on were to buy. I have written several emails to Bafang ..... with F**k all response in return. Are these a myth or do they exist ? has anyone got one for sale ...
  9. T

    (still) Looking for hardtail frame for Bafang M620/Ultra

    theres plenty on ebay
  10. T

    How to recognize Innotrace Controller

    As long as you have spare cases its just boltings i believe for the casings. Innotrace uses a X1 or X2 display like that i have shown in the photos above. There is two modes , eco and sport. eco is usual pre set not to be above 15mph , and the throttle does not work. sport if set higher with...
  11. T

    How to recognize Innotrace Controller

    I have the Just for info , If you send away the Bafang motor to Innotrace, they dont change the outer case. there should be a warranty sticker placed on it by Innotrace to stop you opening the motor up. Below is the mine , which i sent away to germany , and it came back with a sticker on, as...
  12. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Hi , would be interested in making my a battery , suitable for the spec on my bike ?
  13. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Been emailing a few UK battery builders , they have quoted : £550 for 14s6p Samsung 21700 40t , 24AH and Samsung INR21700-50S cells to achieve 45Ah capacity and 270A of continuous discharge current - will come in at around £1,600.00 the second one , uses copper instead of nickle between...
  14. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    wha what sort of range are you getting with that ?
  15. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Thanks for that , that sounds like a good option too. (y)
  16. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Thanks for the Tip , I will chat with him to see his opinion on the best option is. :bigthumb::bigthumb:
  17. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Thanks for that , i will give him a try. is he reasonable in costs, and are 18650 or 21700 ?
  18. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    It is a version of my bike , but mine was sourced from Ali express , with better parts. As I found the Kirbebike Vapour to expensive to honest. So i sourced it myself. I sent my motor and had the X1 controller installed in Germany , by the guys at Innotrace. I only seemed to get 10 to 15...
  19. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Thanks Amberwolf , appreciate your comments. :bigthumb: , i m not sure what my Wh/mile would be due to the batterys i had and there unreliable Ah rating.They both were 52v 20Ah , that i thought would of been good enough. I was contenplating using 14s , 18p version with these..... I also...
  20. T

    Battery packs in Ruk sacks or back packs for Bafang M620 with X1 controller.

    Hi, After going through the usual expensive route of trying source use different types of Fake chinese sourced ah batteries. The ebike i use seems to drain them pretty quickly. It had wrecked two BMS's , to which i had to remove them and then it cooked the both batterys , as they got...
  21. T

    Cannondale hybrid 1000w Hub drive ebike for sale....United kingdom.

    If someone aboard wants it , would ship at there cost, and reduce the Price to £500 , come on Guys you are missing out on a bargin :bigthumb: . Price down to £525 for UK , as i am in North UK.
  22. T

    Cannondale hybrid 1000w Hub drive ebike for sale....United kingdom.

    I would ship it :mrgreen: , might be costly , its a bargin for what it is
  23. T

    Cannondale hybrid 1000w Hub drive ebike for sale....United kingdom.

    Price reduced to £550 , bargain for what it is :)
  24. T

    Cannondale hybrid 1000w Hub drive ebike for sale....United kingdom.

    aaaah yes , accross the pond Phases ... thanks
  25. T

    Cannondale hybrid 1000w Hub drive ebike for sale....United kingdom.

    thanks , not sure what you mean by Fenders thou.... 🤔🤔
Back
Top