Search results

Date Relevance Most replies

  1. H

    450€ for electric motor QS260 3000W with sabvoton 72150 like new (~1500km) Belgium

    3000W electric motor for electric scooter upgrade in perfect condition. can be tested on site. Also suitable for thermal scooter => electric conversions. (possible to advise you for serious buyers) With Michelin 2CT 120/70-12 tire + new brake disc, never used, supplied with its screws...
  2. H

    Sunra 3kW Motor and Sabvoton Controller

    I found how to do it. For your display it depends on the type of speed signal treatment. You have to ask the supplier because some displays take phase signal which is any of the phase wires, other displays take hall signal from any of hall wires which is more accurate.
  3. H

    Sunra 3kW Motor and Sabvoton Controller

    Sorry, didn't see your reply :/ I've abandoned the project for a while till last week. i gave it another shot and magically it works !! because of the mini circuit (not gate) that i've used to convert one of the hall signals, the wire was interrupted by the circuit, so the signal wire coming...
  4. H

    Sabvoton 72150 phase testing, no combination works

    Hey again, actually i've did manually the connector that you have bought and it dosen't work :( it's just a not gate to invert the signal from 0 to 1 logic and vice versa, which means 0-5V inverted between input and output. I've read as well that sometimes to change from 60°to 120°, we have to...
  5. H

    Sabvoton 72150 phase testing, no combination works

    Hey, I'm glad that it's running for you ! i have the same problem and your topic helped me a lot to understand it. Can you please share with us how did you do to switch it ? Actually i've just finished trying to switch the middle hall electrically with a Not gate. the diagram is correct with the...
  6. H

    Sunra 3kW Motor and Sabvoton Controller

    Hey, How did you move the hall sensor ? i have the same problem with my Sunra Hawk. Actually sunra motors have 60° hall angle model, but sabvoton has 120°. I don't know if we can change that the angle of sabvoton to 60° but i've tried to change the motor's angle electrically with a Not gate...
  7. H

    Hall sensor bust - is controller too? Sabvoton

    Hello, actually i had a problem with the the hall test for sabvoton svmc72150 and effectively when i've measured the voltage of hall wires it was 5-3-3 as you mentioned. i know that the problem for me comes from the hall sensor cause it's set on 60° and the sabvoton is set on 120° so i wanted to...
Back
Top